MIG/MAG welding accessories include welding wire, torches and other components used to prepare and operate compatible welding equipment. Selecting the correct filler wire and accessories supports consistent wire feeding, suitable welding conditions and reliable equipment operation.
The Irankistai.lt category includes AlMg and AlSi aluminium welding wire, ER316LSi stainless steel wire, self-shielded flux-core wire and MIG/MAG torches. Products from Sherman and WOERDE are listed. Exact wire diameters, spool dimensions and torch compatibility are specified in individual product descriptions.
AlMg filler wire is used for compatible aluminium alloys where the selected filler metal's mechanical and service properties matter. AlSi wire is used with certain aluminium alloys according to the welding procedure. AlMg and AlSi wires are not universally interchangeable; select the appropriate filler for the base metal and technical requirements.
Self-shielded flux-cored wire provides shielding through its formulation. The process requires a compatible welding machine, correct polarity and manufacturer-specified settings. Not all flux-cored wires are self-shielded, so check the exact product specification.
When selecting a torch, verify the connector, current rating, cooling type, cable length and compatibility with the welding machine. Spool Gun torches use a wire-feeding arrangement near the torch and can be suitable for certain aluminium welding systems, but the machine must support the specific torch.
Switch off the welding equipment according to manufacturer instructions before replacing a torch or welding wire. Use appropriate welding eye and face protection, gloves and other protective equipment. Ensure effective fume extraction and ventilation and follow the safety requirements for the materials used.
Selection depends on the base aluminium alloy, welding process and required weld properties. The catalogue includes AlMg and AlSi wire variants.
Yes, if the machine supports compatible self-shielded flux-core wire and the manufacturer's required settings.
Only if the machine, feed mechanism, contact tip and other components support the selected diameter.
Their alloy compositions and applications differ. Select wire according to the base aluminium alloy and technical requirements.
No. Electrical, mechanical and control-system compatibility must be verified for the specific welding machine.
No. Some flux-cored wires are self-shielded, while others require external shielding gas. Check the product specification.