MIG Welding

MIG Welding

MIG/MAG welding machines use a continuously fed consumable wire electrode to join metals. MIG/MAG welding is widely used in metal fabrication, automotive repair, workshops and installation work. Depending on the machine and wire type, welding may be performed with shielding gas or compatible self-shielded flux-cored wire.

The Irankistai.lt range includes MIG/MAG welders from Sherman, SPARTUS, LOTA, KRAFT&DELE, YOULI and PULI. The catalogue features synergic, multi-process MIG/MAG–MMA–TIG Lift, Dual Pulse and flux-core models, as well as welding kits and accessories. Available functions and supplied equipment vary by model.

Types of MIG/MAG welding machines

  • Single-phase MIG/MAG welders. Machines designed for a manufacturer-specified single-phase supply. The range includes 230 V models such as Sherman DIGIMIG and SPARTUS EasyMIG.
  • Three-phase MIG/MAG welders. A separate category for machines requiring three-phase power. No products are currently active in this subcategory.
  • Synergic MIG/MAG welders. Feature linked parameter adjustment functions that may simplify machine setup.
  • Dual Pulse welders. Selected Sherman and SPARTUS models offer double-pulse functionality. Applications and material compatibility depend on the specific machine.
  • Flux-core welders. Compatible with self-shielded flux-cored wire, which can permit welding without an external shielding gas supply under suitable conditions.
  • Multi-process welding machines. Selected LOTA and other models combine MIG/MAG, MMA and TIG Lift functions.

How to choose a MIG/MAG welder

  • Power supply. Verify whether the machine requires a 230 V single-phase or 400 V three-phase supply. Check the electrical installation and manufacturer requirements.
  • Welding current. The catalogue includes models labelled 135, 180, 200, 220 and 250 A. Consider duty cycle as well as maximum current.
  • Wire type and diameter. Check compatibility with the intended steel, stainless steel, aluminium or flux-cored wire, including the wire-feed mechanism, spool size and required accessories.
  • Shielding gas. MIG and MAG processes use gases selected for the material and filler wire. Compatible self-shielded flux-cored wire can operate without external gas when supported by the machine.
  • Synergic control. Useful for coordinated parameter selection, although programs and adjustment ranges vary by model.
  • Pulse functions. Pulse and Dual Pulse modes may be useful for specific tasks; verify availability and intended applications.
  • Included equipment. Check whether the package includes a MIG torch, return cable, regulator, welding wire and other required components.

Differences between MIG, MAG and flux-core welding

MIG (Metal Inert Gas) welding uses inert shielding gases, while MAG (Metal Active Gas) uses active gases or gas mixtures. Both are consumable-electrode gas-shielded arc welding processes. The term FLUX is often used for self-shielded flux-cored wire, although flux-cored welding processes vary, so always verify the requirements of the wire and machine.

MIG/MAG welders for automotive repair and metal fabrication

Automotive bodywork requires stable parameter adjustment and suitability for thinner sheet metal. Structural fabrication places greater emphasis on duty cycle, consistent wire feeding and compatibility with the chosen material. Aluminium welding may require special wire, feeding equipment, a suitable torch and appropriate welding programs.

MIG/MAG welding kits and accessories

The catalogue also contains welding kit and accessory categories, including MIG torches, Spool Gun and Push-Pull solutions, aluminium welding wire, self-shielded flux-cored wire and other consumables. Always check connector, wire and accessory compatibility with the exact welding machine.

Safe MIG/MAG welding

Work in a properly ventilated area with effective welding fume extraction. Use a welding helmet, gloves and other protective equipment appropriate for the process. Store and handle gas cylinders according to safety requirements. Inspect cables, torch, return connection, wire feeding and manufacturer instructions before use.

Frequently asked questions

What is the difference between MIG and MAG welding?

The main difference is the shielding gas: MIG uses inert gas, while MAG uses active gases or gas mixtures.

Can a MIG/MAG welder work without gas?

Only if the machine supports compatible self-shielded flux-cored wire and the required settings. Not every model supports this process.

Which MIG/MAG welder is suitable for car bodywork?

Look for suitable low-current adjustment, stable wire feeding and compatibility with the intended sheet metal and filler wire.

Is a 250 A welder always better than a 200 A model?

No. Duty cycle, controls, power supply, included accessories and intended work are also important.

What is synergic MIG/MAG welding?

Synergic control links multiple welding parameters through a selected program. Exact capabilities vary by machine.

Can MIG/MAG welders weld aluminium?

Some can, when used with compatible wire, shielding gas, feeding equipment and manufacturer-recommended settings.

6 ratings
Technical specifications Input supply 230 V / 50–60 Hz Welding ..
€8520€9999
Technical specifications Input supply 230 V / 50 Hz Welding processes..
€17424
Technical specifications Input supply 220 V / 50–60 Hz Welding ..
€18150
Technical specifications Manufacturer LOTA Industries Model NBC20..
€19999€38000
Technical specificationsInput supply230 V / 50–60 HzWelding processesMIG/MAG, FCAW, MMA, TIG LiftMIG..
€20038
Technical specifications Manufacturer LOTA Industries Model MIG20..
€21000€40000
Technical specifications Input supply 230 V / 50–60 Hz Welding ..
€23522
Technical specifications Input supply 230 V AC Maximum MIG / TIG / MM..
€23900
Technical specifications Input supply 230 V / 50–60 Hz Welding ..
€25410
Technical specifications Input supply 230 V / 50 Hz Welding processes..
€26000
Technical specifications Input supply 230 V AC Maximum MIG / TIG curr..
€29900
Technical specifications Manufacturer LOTA Industries Model NBC20..
€29999€52000
Technical specifications Manufacturer LOTA Industries Model MIG20..
€30500€55000
Technical specifications Welding processes MIG/MAG, MMA, TIG Lift Inp..
€32500
Technical specifications Input supply 230 V / 50 Hz Welding processes..
€33000
Write
Call us