Painting accessories include parts and consumables for spray guns, airless paint sprayers and other painting equipment. Properly selected spray tips, filters, hoses, paint cups, cleaning kits and holders support equipment maintenance, repairs and convenient painting work.
The Irankistai.lt range includes spray gun accessories, airless painting parts, painting stands and replacement components from YATO, BGS technic, KRAFT&DELE and other brands. Always verify compatibility with the exact equipment model before ordering.
Spray gun replacement parts are used for maintenance and replacing worn components. For example, the BGS 3315-1 nozzle and needle kit has a 0.8 mm nozzle, while the BGS 3315-2 kit has a 1.0 mm nozzle. Both are specified for the BGS 3315 spray gun.
When replacing a nozzle or needle, choose a component designed for the exact spray gun. Matching nozzle diameter alone does not guarantee compatibility between different manufacturers.
Airless spray tips determine nominal spray fan width and orifice diameter. Available YATO accessories include:
Both kits list compatibility with YATO YT-82560 and YT-82562 airless sprayers. Compatibility with other models must be verified separately.
Under the common three-digit airless tip numbering convention, 517 indicates a nominal orifice diameter of 0.017 inches. The first digit relates to the spray fan angle and nominal width at a specified distance.
513, 515, 517, 519 and 521 tips have different orifice diameters. Choose according to the coating manufacturer's recommendations, sprayer capacity and maximum supported tip size. An unsuitable tip may reduce spray quality or exceed the machine's capabilities.
YATO YT-82565 is a 15 m airless spray hose with a 1/4-inch connection, listed as compatible with YATO YT-82562.
YATO YT-82566 is an airless spray gun supplied with a 517 tip, three filters and a G1/4-inch connection. It lists compatibility with YATO YT-82560 and YT-82562.
YATO YT-82568 includes two spray extensions measuring 100 and 180 cm with a G7/8-inch connection. Extensions may make it easier to reach elevated surfaces but must be used according to the manufacturer's instructions.
For high-pressure accessories, check not only connection size but also permitted working pressure, thread standard, sealing and compatibility with the exact gun and sprayer.
Regular maintenance helps prevent clogged nozzles, uneven material delivery and accumulated paint residue.
Choose cleaning products according to the coating composition and equipment manufacturer's recommendations. Not every solvent is compatible with all seals, plastic components or coatings.
The LT1001 plastic paint cup is offered in 120 and 600 ml versions. The 120 ml version lists an M14 × 1.0 internal thread, while the 600 ml version lists an M16 × 1.5 internal thread.
Before buying a replacement cup, check the spray gun connection, thread pitch, sealing method and compatibility with the exact configuration.
Painting stands support, hold or rotate components during painting. Available options include:
Magnetic holders for spray guns and other compatible tools are also available. Check the mounting surface, load and holder construction before use.
After painting, clean spray tips, paint cups and material passages according to the manufacturer's instructions. Replace worn needles, filters, seals and other parts with compatible components.
High-pressure airless spray fluid can penetrate the skin and cause serious injury. Before disconnecting hoses, changing tips or servicing equipment, follow the manufacturer's pressure-relief procedure. Never check leaks with your hand. Seek emergency medical treatment immediately if high-pressure fluid penetrates the skin.
Use suitable personal protective equipment and follow the coating safety data sheet.
No. Nozzles differ in construction, mounting and compatibility with specific spray guns.
Under the common numbering system, it indicates a nominal 0.017-inch orifice. Suitability depends on the coating and sprayer specifications.
Yes. This model is listed in the tip kit's compatibility specifications.
No. In addition to connection size, check the pressure rating, thread type, sealing and manufacturer-approved compatibility.
Match the spray gun model, cup capacity, connection thread and sealing construction.
After use and according to the manufacturer's maintenance instructions. Do not allow paint residue to dry inside the equipment.
No. Check load capacity, support arrangement, component dimensions and mounting stability.