Regulators

Regulators

Gas pressure regulators control gas supply from cylinders to compatible welding, cutting, heating and other technical equipment. A regulator reduces cylinder pressure to a suitable working pressure, while certain models also allow the gas flow to be monitored or adjusted.

The Irankistai.lt range includes argon and CO₂, nitrogen, oxygen and propane-butane regulators from KRAFT&DELE, SHERMAN and DONMET. The catalogue includes models with pressure gauges, flowmeters and different cylinder connections.

Types of gas pressure regulators

  • Argon and CO₂ regulators. Used for shielding gas supply in suitable MIG/MAG and TIG welding applications. Models from KRAFT&DELE, SHERMAN and DONMET are listed.
  • Regulators with flowmeters. Allow gas flow to be monitored according to the device scale and design. The range includes a SHERMAN CO₂ / Ar regulator with a flowmeter.
  • Nitrogen regulators. Designed for nitrogen supply and pressure control in manufacturer-approved technical systems. DONMET models are included in the catalogue.
  • Oxygen regulators. Specialised devices for oxygen supply. Oxygen systems require components specifically designed and prepared for oxygen service.
  • Propane-butane regulators. Used in compatible gas heating, soldering and cutting systems according to manufacturer requirements.

How to choose a gas regulator

  • Gas type. First confirm which gases the regulator is approved or specified for. Regulators for different gases are not automatically interchangeable.
  • Cylinder connection. Check the exact thread type and dimensions. The catalogue includes W21.8 × 1/14-inch and W24.32 connection types, which must be assessed separately.
  • Inlet pressure. The regulator's permitted inlet pressure must meet the requirements of the cylinder and gas system.
  • Outlet pressure. Review the adjustable outlet pressure range against the equipment requirements.
  • Gas flow. Suitable flow adjustment is important for welding shielding gases. Determine whether a flowmeter or another manufacturer-approved flow measurement method is required.
  • Gauges and accessories. Check the included pressure gauges, fittings and other components for each model.

Regulators for MIG/MAG and TIG welding

MIG/MAG and TIG welding processes use shielding gases that must be supplied according to the welding machine and process requirements. Argon, CO₂ and mixture regulators should be selected based on the gas type, cylinder connection and required flow rate.

For example, the KRAFT&DELE KD1822 listing specifies a 315 bar inlet pressure parameter and 32 L/min flow characteristic, while KD1824 is listed with 300 bar and 24 L/min. These are model-specific values, not general specifications for all regulators.

Safe use of gas regulators

Install and operate regulators only according to manufacturer instructions. Before connection, check the gas type, fitting compatibility, cylinder condition and regulator pressure limits. Connections must be leak-tight and damaged equipment must not be used. Oxygen equipment must be kept free from oil, grease and other incompatible substances. Do not use improvised connections or unapproved adapters.

Frequently asked questions

Can the same regulator be used for argon and CO₂?

Only when the manufacturer specifies that the model is compatible with both gases and the relevant cylinder connection.

What is a flowmeter used for?

A flowmeter displays gas flow according to its scale. It can help set shielding gas delivery during welding.

Are W21.8 and W24.32 cylinder connections the same?

No. They have different connection dimensions. Verify the exact thread and manufacturer-approved compatibility before purchase.

Can an argon regulator be used for oxygen?

Not unless the manufacturer explicitly approves that use. Oxygen requires specially designed and prepared components.

How do I determine the required regulator pressure?

Check the cylinder specifications, equipment requirements and the regulator's permitted inlet and adjustable outlet pressure ranges.

Technical specifications Product code ReduktorCO2Ar Gas CO₂, argo..
€2500
Technical specifications Product code KD1824 Gas Argon / CO₂ ..
€2500€3460
Technical specificationsProduct codeGNREDCO2RGasArgon, CO₂ and Ar/CO₂ mixturesNominal inlet pressure..
€2700
Technical specificationsProduct codeKD1822-GasArgon / CO₂Maximum inlet pressure315 barMaximum flow32..
€3000
Technical specifications Product code KD1822 Gas Argon / CO₂ ..
€3000€3618
Technical specifications Product code BPO5DM Gas Propane–bu..
€3523
Technical specifications Product code BKO50DM Gas Oxygen ..
€4169
Technical specificationsProduct codeAR40U30DMGasArgon / CO₂Maximum inlet pressure20 MPa / 200 barMax..
€4216
Technical specificationsProduct codeRARCO200DMGasArgon / CO₂Maximum inlet pressure20 MPa / 200 barMa..
€4232
Technical specificationsProduct codeGNREDCO2-W24,32GasArgon / CO₂Nominal inlet pressure185 barOutlet..
€4500
Technical specifications Product code RP25DM Gas Propane–bu..
€4719
Technical specifications Product code RN200VDM Gas Nitrogen ..
€9642
Technical specificationsProduct codeBAZO150DMGasNitrogenMaximum inlet pressure20 MPa / 200 barMaximu..
€9642
Write
Call us