Welding wire aluminium

Welding wire aluminium

Aluminium MIG welding wire is a filler metal used for welding aluminium and compatible aluminium alloys with suitable MIG welding equipment and shielding gas. Wire alloy, diameter and spool size must be selected according to the base metal, welding machine capabilities and welding procedure.

The Irankistai.lt category includes AlMg4.5Mn, AlMg5 and AlSi5 (ER4043) aluminium welding wire. Listed diameters include 0.8 mm, 1.0 mm and 1.2 mm, with 0.45 kg D100 spools and a 1 kg ER4043 product. Check individual product listings for current availability.

Types of aluminium welding wire

  • AlMg4.5Mn. Aluminium-magnesium filler wire containing manganese, intended for compatible aluminium alloys. The catalogue lists 0.8 mm and 1.0 mm variants.
  • AlMg5. Magnesium-containing aluminium welding wire commonly used for compatible Al-Mg alloy applications. The catalogue includes 0.8 mm, 1.0 mm and 1.2 mm variants.
  • AlSi5 / ER4043. Silicon-containing aluminium filler used for selected aluminium alloys where suitable for the joint and welding procedure. The catalogue lists AlSi5 in 0.8 mm and 1.0 mm, plus ER4043 in a 1.2 mm, 1 kg pack. The AlSi5 1.2 mm D100 product is currently inactive.

AlMg5 vs AlSi5: which wire should you choose?

AlMg5 and AlSi5 differ in chemical composition and intended applications. AlMg5 is magnesium-containing filler metal, while AlSi5 contains silicon. Selection depends on the base aluminium alloy, mechanical properties required of the joint, service conditions and manufacturer limitations. The general description 'aluminium' is not enough to determine the correct filler wire.

How to choose aluminium MIG welding wire

  • Base metal alloy. Check the aluminium grade and the recommended filler material.
  • Wire diameter. Choose 0.8 mm, 1.0 mm or 1.2 mm according to machine capabilities, material thickness and welding parameters.
  • Spool dimensions. D100 spools must fit the welder or Spool Gun spool holder. Check dimensions of the 1 kg package separately.
  • Wire-feed system. Softer aluminium wire may benefit from suitable feed rollers, liners, Spool Gun or Push-Pull systems.
  • Contact tip. Use a contact tip suitable for aluminium wire and the selected diameter, following manufacturer instructions.
  • Shielding gas. Aluminium MIG welding generally uses argon or a suitable argon-helium mixture for the process.

Why does aluminium wire jam in a MIG welder?

Aluminium wire is softer than many steel welding wires. Incorrect feeder adjustment, excessive roller pressure, an unsuitable liner or a sharply bent torch cable can interfere with feeding. Inspect the complete wire path and follow the welding machine and torch manufacturer's recommendations.

Aluminium welding wire for Spool Gun torches

A Spool Gun carries the wire spool near the torch, shortening the wire-feed path. This can be useful for aluminium welding, but spool dimensions and torch-to-welder compatibility must be verified. Not every D100 spool fits every Spool Gun model.

Preparation and safety for aluminium welding

Before welding, remove dirt and oxide using suitable methods without damaging the workpiece. Store welding wire in a clean, dry environment. Set welding parameters for the alloy, wire diameter and material thickness. Use appropriate personal protective equipment and effective welding fume extraction and ventilation.

Frequently asked questions

What is the difference between AlMg5 and AlSi5 welding wire?

AlMg5 contains magnesium, while AlSi5 contains silicon. They differ in alloy composition and suitability for specific aluminium alloys and welding procedures.

Can aluminium be welded with a conventional MIG/MAG welder?

Only if the welding machine supports aluminium welding and suitable wire-feed components, torch and shielding gas are used.

Will a D100 aluminium wire spool fit a Spool Gun?

Only if the spool dimensions, mounting, permitted weight and other torch manufacturer requirements are met.

Which shielding gas is used for aluminium MIG welding?

Argon is commonly used, while certain processes may use a suitable argon-helium blend. Select gas according to manufacturer instructions.

Will 0.8 mm aluminium wire work with every welder?

No. The welding machine and wire-feed system must support the selected diameter and aluminium wire.

Are ER4043 and AlSi5 related designations?

Yes. ER4043 is a widely used classification for aluminium-silicon welding wire. Verify exact product conformity using the manufacturer's specifications.

Technical specificationsProduct codeMG408045Wire alloyAlMg4.5MnWelding processMIGWire diameter0.8 mm..
€899
Technical specificationsProduct codeMG50805Wire alloyAlMg5Welding processMIGWire diameter0.8 mmNet w..
€899
Technical specificationsProduct codeSI50805Wire alloyAlSi5Welding processMIGWire diameter0.8 mmNet w..
€899
Technical specificationsProduct codeMG410045Wire alloyAlMg4.5MnWelding processMIGWire diameter1.0 mm..
€899
Technical specificationsProduct codeMG51005Wire alloyAlMg5Welding processMIGWire diameter1.0 mmNet w..
€899
Technical specificationsProduct codeMG51205Wire alloyAlMg5Welding processMIGWire diameter1.2 mmNet w..
€899
Technical specificationsProduct codeSI51005Wire alloyAlSi5Welding processMIGWire diameter1.0 mmNet w..
€899
Technical specificationsProduct codeER4043121ClassificationAWS A5.10: ER4043Alloy typeAlSi5, approxi..
€1500€2102
Write
Call us