Gas hoses are used to supply gas between compatible components of a gas delivery system, such as a regulator and a gas torch or cutting torch. Selecting the correct hose is an important part of safe oxy-fuel welding, metal cutting and heating equipment operation.
This Irankistai.lt category includes rubber hoses for oxygen and acetylene. The catalogue lists the CHANGLU CL604708 oxygen hose and CL604808 acetylene hose. Both product titles specify an 8 mm diameter and 28 m length. Check each product page for current availability.
Oxygen and acetylene systems are used in various gas heating, welding and metal cutting processes. Each gas must be supplied through an appropriate hose and compatible components. Hose selection depends on gas type, torch requirements, pressure and fittings.
The CHANGLU CL604708 is listed as a rubber oxygen hose, while the CHANGLU CL604808 is listed as a rubber acetylene hose. Although both titles specify 8 mm and 28 m, this does not make the hoses interchangeable.
Before use, inspect the hose for cracks, crushing, heat damage and secure connections. Protect it from sparks, hot surfaces, sharp edges and vehicle wheels. Check connections for leaks using the manufacturer-recommended method, never an open flame. Where required by the system risk assessment or manufacturer instructions, use appropriate certified flashback arrestors or non-return valves. Keep oxygen equipment free from oil and grease.
Not unless the manufacturer explicitly approves such use. Select hoses according to the specific gas and system requirements.
Diameter alone does not establish compatibility. Check fittings, pressure, gas type and the torch manufacturer's requirements.
Not always. Suitable length depends on the workstation, pressure losses and manufacturer-defined operating limits.
Use the manufacturer-specified leak-testing method and appropriate products. Never check for leaks with an open flame.
No. A damaged pressurised gas hose should be replaced or handled only by a manufacturer-approved method.