Welding wire

Welding wire

MIG/MAG welding wire is a filler metal used in wire-feed welding machines to join metal parts and structures. Choosing the correct wire depends on the base material, required weld properties, welding machine capabilities and shielding gas.

The Irankistai.lt category currently includes ER316LSi stainless steel welding wire, 0.8 mm, 5 kg. Historical catalogue listings also include ER70S-6 wire for unalloyed and low-alloy steels, but those products are currently inactive. Check individual product availability and specifications before ordering.

Types of MIG/MAG welding wire

  • ER70S-6 steel welding wire. Solid wire, commonly copper-coated, used for compatible unalloyed and low-alloy steel MAG welding. These catalogue products are currently inactive.
  • ER316LSi stainless steel welding wire. A low-carbon chromium-nickel-molybdenum filler with increased silicon content, used for compatible austenitic stainless steels.
  • Other welding wire alloys. Aluminium wire and self-shielded flux-cored wire are covered in separate MIG/MAG accessory subcategories.

How to choose welding wire

  • Base metal. The filler alloy must be suitable for the material and welding procedure.
  • Wire diameter. When selecting 0.6, 0.8 or 1.0 mm wire, check the welder, feed rollers and contact tip.
  • Spool size. The catalogue contains 5 kg and 15 kg package variants. Verify spool diameter, mounting and permitted machine capacity.
  • Shielding gas. Choose gas according to the wire alloy, base metal and manufacturer instructions.
  • Welding settings. Current, voltage and wire-feed speed depend on material thickness, joint design and selected wire.

ER70S-6 wire for structural steel

ER70S-6 solid wire is used with compatible carbon and low-alloy steels, commonly with CO₂ or a suitable argon/CO₂ blend. Check the product specification for classification, wire diameter, polarity and welding settings. Do not automatically use this wire for stainless steel or aluminium.

ER316LSi wire for stainless steel

ER316LSi is a filler wire for compatible austenitic stainless steels, including certain 316 and 316L applications. Molybdenum contributes to relevant corrosion-resistance properties, while increased silicon can improve weld-pool fluidity. Suitability depends on the base material grade and technical requirements.

Which shielding gas should you use?

ER70S-6 wire commonly uses CO₂ or an appropriate argon/CO₂ mixture. Stainless steel ER316LSi wire may require a different gas composition, such as an argon-based mixture with a small active-gas addition. Do not assume one gas mixture is suitable for every wire. Follow the manufacturer's recommendations and welding procedure.

Wire feeding, maintenance and safety

Switch off the welding machine according to its instructions before fitting a spool. Use feed rollers and a contact tip matched to the wire diameter. Store welding wire in a clean, dry environment and protect it from contamination. Use appropriate welding eye and face protection, gloves and other protective equipment, with effective fume extraction and ventilation.

Frequently asked questions

What is the difference between ER70S-6 and ER316LSi welding wire?

ER70S-6 is generally used for compatible structural steels, while ER316LSi is intended for certain austenitic stainless steels. They are not universally interchangeable.

Will 0.8 mm wire fit every MIG/MAG welder?

No. The welding machine, wire-feed mechanism and contact tip must support the selected diameter.

Can ER70S-6 wire be used without shielding gas?

Conventional solid ER70S-6 wire requires an external shielding gas supply.

Which wire should I choose for stainless steel?

Select wire according to the stainless steel grade, welding procedure and required corrosion resistance. ER316LSi is suitable only for compatible applications.

Will a 5 kg spool fit my welding machine?

Check the spool's outside diameter, mounting arrangement and the machine manufacturer's capacity limits, not just its weight.

Can I use the same shielding gas for mild steel and stainless steel?

Not necessarily. Gas composition should be selected according to the filler alloy, base metal and welding procedure.

Technical specificationsProduct codeER316LSi085Classification listed in catalogueAWS A5.9: ER316LSiA..
€6500€7475
Write
Call us