Welding magnets and magnetic angle holders are positioning tools used to temporarily secure ferromagnetic metal parts during assembly, alignment and welding preparation. They help hold workpieces at selected angles and make it easier to tack-weld components before final joining.
The Irankistai.lt range includes YATO, BGS and other manufacturers' welding magnets, L-shaped holders, adjustable magnetic angles, magnet sets and magnetic welding torch stands. Listed models include nominal holding ratings from 4 to 34 kg, as well as an adjustable YATO holder labelled 2 × 22.5 kg. Specifications vary by product.
Magnetic holders are commonly used during the assembly and positioning of metal frames, tubes, profiles, angles and fabricated structures. They can temporarily maintain alignment until the workpiece is additionally secured. Use appropriate measuring tools to verify geometry and mechanical clamps where required.
Welding magnets are not certified lifting devices unless the manufacturer expressly states otherwise. Do not use them to suspend loads or as the sole means of preventing a workpiece from falling. Consider possible magnetic interference with the welding arc and protect magnets from excessive heat and weld spatter. Magnetic positioning tools do not replace mechanical restraint where safety requires it.
Only on magnetic stainless steel grades. Many austenitic grades are not sufficiently magnetic for reliable holding.
It is a manufacturer-declared holding characteristic under specified test conditions. Actual performance depends on surface condition, material thickness, contact area and load direction.
This depends on its design and manufacturer instructions. Excessive heat and magnetic interference can affect the process, so moving the magnet after initial tack welding may be appropriate.
Not in every application. Magnets help with positioning, while mechanical clamps may be required for greater forces, accurate compression or safe restraint.
A magnetic angle holder positions workpieces, whereas a torch stand holds a compatible welding torch between operations.