Earth Augers and Accessories

Earth Augers and Accessories

Earth auger bits and accessories help adapt powered earth augers to different drilling tasks. The Irankistai.lt range includes spiral auger bits, extensions, adapters and replacement blades. Choose accessories according to the required hole diameter, drilling depth, connection dimensions and compatibility with the specific machine.

Spiral earth auger bits

Spiral earth auger bits are used to create holes in soil. The catalogue includes bits in several diameters, including 40, 60, 80, 100, 150, 200 and 250 mm. Many product listings specify an 800 mm length and a 20 mm internal connection diameter, but these dimensions do not apply to every bit.

Choose the bit diameter according to the fence post, support or other installation requirements. A larger bit is not necessarily suitable for a lower-powered machine; always observe manufacturer limits.

Auger bits for frozen and difficult ground

The catalogue includes specialised ADA FROZEN bits for more demanding ground conditions. For example, the ADA FROZEN 200 × 800 mm listing specifies use in frozen and rocky soil and a 20 mm connection. Actual suitability depends on the machine, ground conditions and manufacturer guidance.

Earth auger extensions

An auger extension is used when the standard bit cannot reach the required depth. The category includes a 500 mm extension with a listed 20 mm connection, as well as other lengths. Before use, verify compatibility with the machine drive and bit, and confirm that the manufacturer permits the proposed setup.

Adapters and replacement blades

The range includes the ADA Spring Adapter 20/20 and ADA Frozen Ground Blade replacement blades. Adapters must match the connection dimensions and machine design, while blades must match the specific auger bit and mounting arrangement. Similar-looking parts are not necessarily interchangeable.

How to choose earth auger accessories

  • Bit diameter. Match the required hole size and the machine's permitted bit diameter.
  • Connection dimensions. Check the internal fitting diameter, drive shaft and locking arrangement.
  • Bit length. Consider the required depth and whether a compatible extension may be used.
  • Ground conditions. Soft, hard or frozen soil may require different bit designs.
  • Machine capability. Do not exceed the manufacturer's bit size or operating limits.
  • Included components. Confirm whether fixing parts, adapters or spare blades are supplied.

Safe use and maintenance

Locate underground utilities before drilling. Fit or replace auger bits, extensions and blades only with the engine switched off and all moving parts stopped. Check the locking arrangement and bit condition, and follow the manufacturer's instructions. After use, remove soil, inspect the blades and protect metal components from corrosion.

Frequently asked questions

Do all earth auger bits have a 20 mm connection?

No. Although many listed products specify a 20 mm fitting, other sizes also exist. Check each product's specifications.

How do I choose an auger bit diameter?

Choose according to the required hole size, soil conditions and the machine's capabilities, following installation and manufacturer requirements.

Will an auger extension fit any earth auger?

No. The extension must match the connection, locking design and manufacturer-approved setup.

What is different about ADA FROZEN auger bits?

ADA FROZEN models are listed for more demanding conditions, including frozen ground. Suitability depends on the specific model and working conditions.

Can worn auger blades be replaced separately?

Yes, where the auger design permits replacement and compatible spare blades are available. Follow the manufacturer's instructions.

Can I drill without locating underground utilities?

No. Identify underground cables, pipes and other services before starting work.

Technical specificationsBrandADA InstrumentsProduct codeA00238TypeEarth auger extensionAccessory len..
€1700
Technical specificationsBrandADA InstrumentsProduct codeA00280TypeReplacement auger bladesCompatible..
€1999
Technical specifications Brand JOHN GARDENER Product code G81056A..
€2000
Technical specificationsProduct code84671TypeEarth auger bitAuger diameter150 mm..
€2500
Technical specificationsBrandADA InstrumentsProduct codeA00281TypeReplacement auger bladesCompatible..
€2599
Technical specificationsBrandJOHN GARDENERProduct codeG81056CTypeEarth auger bitAuger diameter200 mm..
€3000
Technical specificationsBrandADA InstrumentsProduct codeA00454TypeEarth auger bitAuger diameter80 mm..
€3199
Technical specificationsBrandADA InstrumentsProduct codeA00366TypeSpring adapter for earth augersInn..
€3200
Technical specificationsBrandADA InstrumentsProduct codeA00287TypeEarth auger bitAuger diameter250 m..
€3700
Technical specificationsBrandADA InstrumentsProduct codeA00277TypeAuger bit for frozen and stony soi..
€4100
Technical specificationsBrandADA InstrumentsProduct codeA00278TypeAuger bit for frozen and stony soi..
€5300
Technical specificationsBrandADA InstrumentsProduct codeA00452TypeEarth auger bitAuger diameter40 mm..
Technical specificationsBrandADA InstrumentsProduct codeA00453TypeEarth auger bitAuger diameter60 mm..
Write
Call us