Power Tools

Power Tools

Electric and cordless power tools for construction, renovation and workshops

Power tools are used for drilling, cutting, grinding, fastening, installation, finishing, woodworking and metalworking. Choosing the appropriate tool helps improve accuracy, efficiency and safe operation within manufacturer requirements.

At Irankistai.lt, explore corded and cordless power tools, drills, drivers, rotary hammers, grinders, saws, routers, workshop machines, soldering equipment, measuring instruments and accessories. The catalogue also includes specialised construction, lifting and electrical supply equipment.

Before purchasing, consider the intended task, material, tool design, workload, power supply, performance and compatible accessories.

Cordless and corded power tools

Cordless power tools

Cordless power tools allow operation without a continuous mains connection. They are commonly used on construction sites, for installation work and in workshops where mobility is important.

Check battery voltage (V), capacity (Ah), energy (Wh), charger compatibility and the manufacturer's battery platform. Identical voltage ratings do not guarantee compatibility between different brands or battery systems.

Runtime depends on available battery energy, tool load, operating mode and environmental conditions. Also verify whether the battery and charger are included in the package.

Corded electric tools

Corded electric tools operate from the mains supply and may be suitable for longer work sessions where appropriate electrical power is available.

Consider input power, operating modes, load limitations, cable safety and the manufacturer's recommended operating conditions.

Drilling, driving and fastening tools

Drills and screwdrivers

Drills and drivers are used for drilling holes and installing fasteners. Important factors include torque, speed range, chuck design, drilling modes and the material being worked.

Hammer drilling may be useful for certain masonry applications, but a conventional hammer drill is not the same as an electro-pneumatic rotary hammer.

Impact wrenches

Impact wrenches are used to loosen and tighten suitable nuts, bolts and other fasteners. Key specifications include torque, square drive size, impact rate, speed and operating modes.

Maximum advertised torque does not necessarily correspond to the required tightening torque of a specific joint. A suitable torque wrench should be used when accurate final tightening is required.

Rotary hammers and demolition hammers

Rotary hammers are used for drilling concrete, masonry and other permitted materials. Demolition hammers are designed for chiselling and breaking applications.

Compare impact energy (J), impact rate, operating modes, weight and tool-holder systems. SDS-Plus and SDS-Max are different systems, and their accessories are not directly interchangeable.

Diamond drilling equipment

Diamond drilling equipment is used to form holes in suitable mineral materials using compatible core bits and operating methods.

Check permitted drilling diameter, wet or dry operation, mounting system, protective features and dust or water management requirements.

Cutting and woodworking tools

Circular saws, reciprocating saws and jigsaws

Circular saws are used for straight cutting operations within their intended applications. Reciprocating saws may be useful for demolition and cutting different materials, while jigsaws can perform straight and curved cuts in suitable materials.

Check cutting depth, stroke or blade diameter, speed adjustment, blade mounting and material compatibility.

Routers, planers and wall chasers

Routers are used to create grooves, edges and other suitable profiles. Electric planers process compatible wood surfaces, while wall chasers cut channels in suitable masonry materials.

Consider cutting or planing depth, working width, speed, accessory mounting and dust extraction options.

Electric metal shears

Electric metal shears are designed to cut sheet metal within the manufacturer's permitted material and thickness limits. Consider cutting mechanism, maximum sheet thickness and manoeuvrability.

Grinding, polishing and sharpening equipment

Angle grinders

Angle grinders are used for grinding, cleaning and, with suitable discs and guards, cutting operations.

Important factors include disc diameter, spindle mounting, rotational speed, power, protective guards and control features. The disc's maximum permitted rotational speed must be at least as high as the tool's maximum speed, and the disc must be intended for the specific operation.

Random orbital, belt and die grinders

Random orbital sanders are used for surface preparation and finishing. Belt sanders may be suitable for more intensive material removal, while die grinders are used for detailed and specialised work.

Check abrasive dimensions, stroke, speed adjustment, accessory compatibility and dust collection options.

Concrete, wall and ceiling grinders

Concrete grinders process suitable mineral surfaces. Wall and ceiling sanders are commonly used for compatible finishing surfaces.

Consider grinding disc type, working width, adjustment features and suitable dust extraction. Exposure to mineral dust must be controlled using appropriate measures.

Rotary tools, polishers and sharpeners

Rotary tools and engravers are used for detailed grinding, engraving and other permitted operations. Polishers finish suitable surfaces, while sharpeners maintain compatible cutting tools.

The catalogue also includes specialised equipment for grinding metal, wood and pipes. Suitability depends on machine design, accessories and materials.

Workshop machines and specialised equipment

Workshop machines are designed for specific machining operations where workpiece holding, precision and equipment construction are important. Check working capacity, dimensions, power, accessory compatibility and safety requirements.

Ultrasonic cleaners use ultrasonic cavitation in a liquid to clean suitable components and objects. Consider tank capacity, operating frequency, heating functions, cleaning solution compatibility and the material being cleaned.

Not every cleaning liquid or material is suitable for ultrasonic cleaning. Flammable liquids and other substances prohibited by the manufacturer must not be used.

Construction, concrete and installation equipment

Construction mixers and concrete vibrators

Construction mixers are used to mix suitable materials according to manufacturer specifications. Important factors include torque, speed adjustment, mixing paddle compatibility and permitted batch size.

Concrete vibrators help consolidate fresh concrete within their intended applications. Check vibrator head diameter, shaft length, power requirements and suitability for the structure.

Insulation material cutting tools

Insulation processing tools are used to cut or shape specific insulation materials. Check material compatibility, thickness, cutting technology and ventilation requirements.

Soldering, heating and adhesive tools

Soldering irons and soldering stations are used for electronics, electrical connections and other permitted soldering operations. Check temperature adjustment, tip types, thermal performance and operating modes.

Heat guns are used for heating, heat-shrink tubing, paint removal and other suitable applications. Consider temperature, airflow and the material's heat sensitivity.

Plastic pipe welding tools form joints in compatible thermoplastic pipes using the specified joining process. Hot glue guns are designed for compatible glue sticks and materials.

Measuring, lighting and electrical supply equipment

Measuring instruments and levels

Measuring instruments and levels are used to determine distances, levels, angles and other quantities according to the instrument's functions.

Consider measuring range, accuracy, working environment, calibration requirements and protection rating.

Work lighting

Work lights illuminate construction sites, workshops and working areas. Check luminous flux, power supply, environmental protection and permitted operating conditions.

Extension leads, voltage stabilisers and UPS systems

Extension leads must be selected according to electrical load, conductor cross-section, cable length, protection rating and operating environment.

Voltage stabilisers regulate voltage within their technical capabilities. Uninterruptible power supplies (UPS) may temporarily supply power during a mains failure when equipped with a suitable energy storage system.

Not every voltage stabiliser provides backup power. UPS suitability depends on power rating, output waveform, battery capacity and connected load.

Electric motors

Electric motors drive compatible machinery and mechanisms. Check rated output, rotational speed, voltage, number of phases, mounting dimensions and shaft specifications.

Lifting and pulling winches

Electric and other lifting or pulling winches are designed for specific load-handling applications according to manufacturer requirements. Distinguish lifting capacity from pulling force and check rope or chain specifications, operating duty and mounting conditions.

Not every pulling winch is suitable for vertical lifting. Lifting people requires equipment specifically designed and approved for that purpose.

How to choose the right power tool

  • Application: match the tool to the intended operation and material.
  • Power and performance: consider torque, speed, impact energy and task-specific parameters, not wattage alone.
  • Power supply: compare corded and cordless options according to the working environment.
  • Workload: check the manufacturer's intended operating conditions and load limits.
  • Package contents: verify batteries, chargers, discs, drill bits and other necessary accessories.
  • Compatibility: check chucks, spindles, disc sizes, SDS systems and battery platforms.
  • Ergonomics: consider weight, vibration, noise, handles and ease of control.
  • Safety: review protective guards, dust management, electrical safety and manufacturer instructions.

Power tool maintenance and safe operation

Before use, inspect the tool, cable or battery, protective guards, switches and accessories. Use only compatible consumables and do not exceed permitted speed or load limits.

Before changing accessories, cleaning or performing maintenance, disconnect the tool from the mains or remove its battery where required by the manufacturer. Use appropriate eye, hearing, hand and respiratory protection according to the risks of the task.

Frequently asked questions

What is the difference between corded and cordless power tools?

Corded tools operate from the mains supply, while cordless tools use rechargeable batteries. The choice depends on mobility, operating time, power requirements and model specifications.

Are batteries with the same voltage compatible with all tools?

No. Compatibility depends on the manufacturer's battery platform, connectors, electronic control and model requirements. Matching voltage alone does not guarantee compatibility.

Does higher wattage always mean better tool performance?

No. Mechanical efficiency, torque, speed, construction, operating modes and application requirements also affect performance.

What is the difference between SDS-Plus and SDS-Max rotary hammers?

They use different accessory mounting systems. SDS-Max is often found on heavier-duty equipment, but the correct choice depends on the machine and intended work.

How do I choose an angle grinder disc?

Check disc diameter, mounting dimensions, permitted speed, intended application and material compatibility. The disc and guard must be suitable for the grinder.

Are a UPS and a voltage stabiliser the same thing?

No. A stabiliser regulates voltage according to its design, while a suitable UPS can temporarily power connected equipment during an outage. Available functions depend on the model.

Can any cleaning solution be used in an ultrasonic cleaner?

No. The solution must be compatible with the cleaner and the objects being cleaned. Flammable liquids and other substances prohibited by the manufacturer must not be used.

Can a pulling winch be used for lifting loads?

Only when the manufacturer explicitly permits lifting and the equipment meets the applicable load-handling requirements. Pulling force does not automatically indicate safe vertical lifting capacity.

Write
Call us