LOTA NBC200 220 A MIG/MAG, MMA and TIG LIFT Multiprocess Welder

LOTA NBC200 is a multiprocess welder for MIG/MAG, MMA and TIG LIFT work. The catalogue also lists self-shielded flux-cored wire welding without external shielding gas.

The machine offers manual and synergic MIG control with a digital LED display. Its general catalogue current range is 50–220 A; separate MMA and TIG LIFT current limits are not specified in the listing.

Manual and synergic MIG

Synergic profiles assist initial parameter selection, while manual control allows adjustment for the task. Match final settings to the workpiece, wire and shielding gas.

Wire and spools

The listed wire diameters are 0.8, 1.0 and 1.2 mm, with 1–5 kg spools designated D200 in the catalogue. For self-shielded wire, use the polarity specified by the wire manufacturer and a configuration permitted by the machine manual.

Assessing duty cycle

The catalogue lists 60% at 220 A and 100% at 170 A. Test temperature and reference period are not supplied, so these values are not an unconditional promise of continuous operation. Refer to the machine rating plate and manual.

Included equipment and TIG LIFT

The listed set contains the LOTA NBC200 machine, class 15 MIG torch with a 3 m lead, work return cable, electrode holder and gas hose. A TIG torch is not listed; select a suitable torch and other required TIG LIFT accessories separately.

Power connection and cooling

Match the 220 V ±10% supply and circuit capacity to the machine rating plate. The catalogue lists a 29 A Imax input current. Keep fan ventilation openings clear and check the actual IP protection rating on the machine.