Sherman CUTTER 70 plasma cutter, 65 A, 400 V, up to 23 mm

Delivery in 3-10 w.d.

Product code: SINW-CUTTER70

Available quantity Delivery time 3-10 working days

Delivery by order in 3-10 working days!

Technical specifications

Product code SINW-CUTTER70
Power supply 3 × 400 V, 50 Hz
Cutting current range 20–65 A
Duty cycle 65 A / 60 %
Maximum stated cutting thickness 23 mm
Maximum input current 12 A
Maximum apparent input power 6.9 kVA
Dimensions 570 × 255 × 490 mm
Machine weight listed in catalogue 19.4 kg
Technology IGBT
Torch A-81, 6 m
Arc ignition HF with pilot arc
Recommended compressor delivery in manufacturer brochure 200 l/min
A-81 torch airflow in manual 160 l/min
A-81 torch air pressure in manual 4.5–5.0 bar
€61000 inc VAT
Have any questions about this item? Ask
Manufacturer: Sherman

Sherman CUTTER 70 is an IGBT plasma cutter for steel, aluminium, copper and other electrically conductive metal workpieces. Its 20–65 A adjustable current allows the setting to be matched to material, thickness and travel speed.

The machine uses a three-phase 3 × 400 V, 50 Hz supply. The maximum stated cutting thickness is 23 mm and the rated duty cycle is 65 A / 60%. An external compressed-air source is required.

Torch and arc ignition

The A-81 torch with a 6 m lead uses HF high-frequency ignition with a pilot arc. Select consumables for this torch type and operating current; the lead provides working distance from the power source.

Controls and air test

2T/4T modes provide a choice of torch-trigger operation for short or longer cuts. The TEST function checks and purges the air circuit before cutting. The built-in air preparation unit allows pressure to be adjusted and monitored from the front panel.

Compressed-air supply

The manufacturer brochure recommends compressor delivery of 200 l/min. The separate A-81 torch table in the manual specifies 160 l/min at 4.5–5.0 bar. Select the compressor by delivered airflow at working pressure; supply clean, dry air and allow for hose and filter losses.

Cutting limits and duty cycle

23 mm is the maximum stated thickness under optimum conditions; actual results depend on metal type, workpiece thickness, travel speed and torch consumable condition. Check the required cut quality on a sample. The 65 A / 60% duty cycle means 6 minutes of cutting followed by 4 minutes of cooling within a 10-minute cycle, under the manufacturer’s specified conditions.

Supplied equipment

  • Plasma cutting machine
  • A-81 plasma torch – 6 m
  • Return cable with clamp
  • Welding hand shield
  • Chipping hammer with brush

There are no reviews for this product!

Write
Call us