KRAFT&DELE KD3424 plasma cutter, 75 A, 230 V

Discount -23%
In Warehouse

Product code: KD3424

Available quantity Available

Fast Delivery

Technical specifications

Product code KD3424
Power supply 230 V ±15 %
Declared cutting current 75 A
Duty cycle 60 %
Maximum stated cutting thickness 25 mm
Apparent input power 6.9 kVA
Air requirement listed in catalogue 250 l/min
Machine weight listed in catalogue 12.93 kg
€23000 €30000 inc VAT
This item has a discount and you save - €7000
Have any questions about this item? Ask
Manufacturer: Kraftdele

KRAFT&DELE KD3424 is an IGBT inverter plasma cutter for electrically conductive metals. It is intended for preparing steel, stainless steel, copper and other non-ferrous metal parts in workshop repair, fabrication and installation work.

The manufacturer declares a 75 A cutting current and a maximum cutting thickness of up to 25 mm. The machine requires a 230 V ±15% supply and an external compressed-air source; the stated air requirement is 250 l/min.

Current adjustment and controls

IGBT and PWM technology generates the cutting output. The front panel includes a display, current-adjustment knob, pressure gauge and air-pressure adjustment. Select current for the material, thickness and torch consumables in use.

Compressed-air preparation

Supply clean, dry air. Select the compressor by its delivered airflow at operating pressure rather than tank size alone. The condensate drain helps remove accumulated moisture. Check the required pressure against the machine and torch instructions; 250 l/min is a flow rate, not a pressure setting.

Cut thickness and edge quality

Up to 25 mm is the manufacturer's maximum declared limit, rather than a guarantee of the same edge quality at this thickness in every metal. Results depend on material, travel speed, airflow, current and nozzle and electrode condition. A separate quality-cut thickness has not been confirmed.

Duty cycle and torch cooling

The stated duty cycle is 60%. Follow the conditions on the individual machine's rating plate and in its instructions. Delayed air shut-off after cutting supports torch cooling. If overheating or overload protection activates, allow the machine to cool; restarting a cut does not replace the required cooling pause.

Supplied equipment

  • KD3424 plasma cutting machine.
  • AG-60 plasma torch; the manufacturer lists a lead length of approximately 3.5 m.
  • Work return cable with clamp.
  • Air hose with clamps.
  • Welding hand shield.
  • Wire brush.

A compressed-air compressor is not included in this package.

There are no reviews for this product!

Write
Call us