PULI CUT80A plasma cutter, 80 A, 380 V

PULI CUT80A is a IGBT plasma cutter for electrically conductive metals in workshop repair and fabrication work. Cutting current adjusts over a 20–80 A range.

The listed supply is 380 V and the maximum stated cutting thickness is 30 mm. An external compressed-air source is required; a compressor is not listed as included.

Torch and operating features

The P80 torch with a 5 m lead is intended for plasma cutting. The listed 8 bar maximum does not replace the 5 bar operating pressure.

Compressed-air supply

The listed air requirement is 200 l/min at an operating pressure of 5 bar. Supply clean, dry air and select the compressor by delivered airflow at working pressure. Tank size alone does not establish its ability to sustain the required flow.

Cutting limit and duty cycle

30 mm is the maximum stated limit; a separate quality-cut thickness is not confirmed. Results depend on metal, current, travel speed, airflow and consumable condition. The listed duty cycle is 60%; check its conditions on the rating plate and in the manual. Maintain the specified operating and cooling periods.

MMA welding

CUT80A additionally supports coated-electrode MMA welding over a 30–250 A range. A separate electrode holder with a 3 m lead is included. The MMA current range is not the plasma cutting output.

Supplied equipment

• Plasma cutting machine
• Mains cable – 3 m
• P80 plasma torch – 5 m
• Air hose – 3 m
• Return cable – 3 m
• MMA electrode holder with cable – 3 m
• Air pressure regulator