Product code: CUT60L
Available quantity Available
| Product code | CUT60L |
|---|---|
| Power supply | 220 V, 50/60 Hz |
| Cutting current range | 20–60 A |
| Maximum stated cutting thickness | 20 mm |
| Open-circuit voltage | 311 V |
| Operating output voltage | 88–104 V |
| Duty cycle | 40 % |
| Apparent input power | 11 kVA |
| Input power | 8.8 kW |
| Operating air pressure | 3.5–4.5 bar |
| Maximum air pressure listed in catalogue | 6 bar |
| Air requirement listed in catalogue | 200 l/min |
| Ingress protection | IP21 |
| Insulation class | F |
| Dimensions | 425 × 205 × 385 mm |
| Machine weight listed in catalogue | 14.1 kg |
PULI CUT60L is a IGBT plasma cutter for electrically conductive metals in workshop repair and fabrication work. Cutting current adjusts over a 20–60 A range.
The listed supply is 220 V and the maximum stated cutting thickness is 20 mm. An external compressed-air source is required; a compressor is not listed as included.
The package includes an AG60 torch with a 4 m lead and an air-pressure regulator. The listed 6 bar maximum does not replace the 3.5–4.5 bar operating range.
The listed air requirement is 200 l/min at an operating pressure of 3.5–4.5 bar. Supply clean, dry air and select the compressor by delivered airflow at working pressure. Tank size alone does not establish its ability to sustain the required flow.
20 mm is the maximum stated limit; a separate quality-cut thickness is not confirmed. Results depend on metal, current, travel speed, airflow and consumable condition. The listed duty cycle is 40%; check its conditions on the rating plate and in the manual. Maintain the specified operating and cooling periods.
| Specification | |
|---|---|
| Manufacturer | PULI |
There are no reviews for this product!