ESAB Warrior Spec Shade 5 Welding Safety Glasses | DIN 5 | UV & IR Protection

ESAB Warrior Spec Shade 5 are professional protective safety glasses featuring DIN 5 tinted lenses, designed for suitable gas welding, metal cutting and other applications requiring protection from intense light.

The lenses provide ultraviolet (UV) and infrared (IR) protection, while the Shade 5 filter reduces exposure to intense visible light.

Optical Class 1 lenses provide clear vision with minimal optical distortion. A special hard coating improves scratch resistance, making the glasses suitable for regular workshop and metalworking use.

The supplier specifies EN 166-F compliance, indicating low-energy impact protection under the relevant standard's test conditions.

Features & Additional Information

DIN 5 Lens Shade

The DIN 5 shade helps reduce exposure to intense light during suitable welding and metalworking applications.

This shade may be appropriate for certain gas welding and cutting operations, depending on the process, operating parameters and applicable safety requirements.

UV and IR Protection

The lenses are designed to provide protection against:

• Ultraviolet (UV) radiation.

• Infrared (IR) radiation.

• Intense visible light through the DIN 5 filter.

Optical Class 1 Lenses

Optical Class 1 lenses provide clear vision with reduced distortion.

This is particularly useful for precision work and tasks requiring accurate visibility of the workpiece.

Scratch-Resistant Hard Coating

The special hard coating helps reduce scratches caused by everyday use and supports longer-lasting lens clarity.

EN 166-F Impact Protection

The supplier-listed EN 166-F classification indicates protection against low-energy impacts from high-speed particles.

Class F corresponds to a test involving a 6 mm steel ball travelling at 45 m/s.

Applications

Suitable for:

• gas welding operations;

• certain plasma cutting applications where DIN 5 is adequate;

• metalworking tasks involving intense light;

• professional workshops;

• metal repair and maintenance work.

Key Benefits

• DIN 5 lens shade.

• UV and IR protection.

• Optical Class 1 lenses.

• Scratch-resistant hard coating.

• EN 166-F protection classification.

• Low-energy impact protection.

• Suitable for compatible gas welding and cutting operations.

• Part of the professional ESAB Warrior product range.

Important Safety Information

DIN 5 protection is not suitable for every welding or cutting process. Always confirm that the shade level meets the requirements of the specific application.

These glasses must not replace an appropriate welding helmet during MMA, MIG/MAG or TIG arc welding.

For plasma cutting, verify the cutting current and the equipment manufacturer's recommended shade level. Higher protection may be required.

The glasses do not provide full-face coverage. Additional face protection may be necessary where sparks, hot particles or other hazards are present.