Product code: YT-99743
Available quantity Available
| Parameter | Specification |
|---|---|
| Brand | YATO |
| Model | YT-99743 |
| Series | GRF |
| Type | Direct-fired liquid-fuel heater |
| Heating output | 50 kW |
| Manufacturer-stated max. heating area | up to 500 m²* |
| Airflow | 1100 m³/h |
| Fuel | Diesel / kerosene |
| Fuel tank capacity | 50 L |
| Fuel consumption | 4 kg/h ** |
| Air pressure | 0.45 bar |
| Temperature control | Yes |
| Thermostat | Manual |
| Display | LED |
| Flame failure sensor | Yes |
| Power supply | 220–240 V AC |
| Frequency | 50 Hz |
| Fan motor power | 340 W |
| Hot-air outlet diameter | 220 mm |
| Protection rating | IPX4 |
| Power cable length | 1.3 m |
| Dimensions | 1076 × 515 × 585 mm |
| Weight | 23.2 kg |
*The stated 500 m² is the manufacturer's maximum reference value. Actual heating performance depends on room volume, ceiling height, insulation, outdoor temperature, ventilation and heat loss.
YATO YT-99743 is a powerful 50 kW direct-fired liquid-fuel air heater designed for intensive heating and drying of large, properly ventilated working areas. Its high heating output and airflow of up to 1100 m³/h provide rapid distribution of warm air in workshops, industrial facilities, warehouses, construction sites and other large spaces.
The manufacturer specifies a maximum heating area of up to 500 m². A large 50-litre fuel tank enables extended operation without frequent refuelling, while the stated fuel consumption is 4 kg/h.
The heater features a manually adjustable thermostat and LED display, allowing the required temperature to be selected and operation to be monitored. A built-in flame failure sensor provides additional operating safety.
The durable metal housing has a powder-coated finish for improved corrosion resistance. Transport wheels and a handle make the 23.2 kg unit easier to move around the workplace.
The YATO YT-99743 is suitable for properly ventilated:
Its 50 kW output makes it particularly suitable for larger spaces where lower-output heaters may not provide sufficient heating capacity.
The integrated 50-litre fuel tank reduces the need for frequent refuelling. Actual continuous operating time depends on fuel type, operating conditions, ambient temperature and heater workload.
YATO YT-99743 is a direct-fired fuel heater. Combustion products are released directly into the heated area together with the warm air. Adequate continuous ventilation and fresh-air supply must therefore be provided during operation.
The heater is not suitable for sleeping areas or inadequately ventilated enclosed spaces. Always follow the manufacturer's requirements regarding safety clearances, fuel selection, ventilation and fire safety.
