Product code: YT-99739
Available quantity Available
| Parameter | Specification |
|---|---|
| Brand | YATO |
| Model | YT-99739 |
| Series | GRF |
| Type | Liquid-fuel air heater with flue connection |
| Heating output | 30 kW |
| Manufacturer-stated max. heating area | up to 300 m²* |
| Airflow | 795 m³/h |
| Fuel | Diesel |
| Fuel tank capacity | 50 L |
| Fuel consumption | 2.4 kg/h ** |
| Air pressure | 0.31 bar |
| Temperature control | Yes |
| Thermostat | Manual |
| Display | LED |
| Flame failure sensor | Yes |
| Flue/exhaust connection | Yes |
| Exhaust pipe | Not included |
| Power supply | 220–240 V AC |
| Frequency | 50 Hz |
| Fan motor power | 340 W |
| Hot-air outlet diameter | 230 mm |
| Protection rating | IPX4 |
| Power cable length | Approx. 1.25–1.3 m*** |
| Dimensions | 1050 × 515 × 695 mm |
| Weight | 26.5 kg |
YATO YT-99739 is a powerful 30 kW liquid-fuel air heater designed for heating larger working areas and for drying applications. A key feature is the provision for connection to a combustion-gas exhaust system, allowing exhaust gases to be routed outside the heated area when the system is correctly installed.
The heater delivers up to 795 m³/h of airflow, while YATO specifies a maximum heating area of up to 300 m². Its large 50-litre fuel tank supports extended operation without frequent refuelling.
A manually adjustable thermostat allows the required temperature to be set, while the LED display shows the current ambient temperature. A built-in flame failure sensor provides additional operating safety.
The durable metal housing, transport wheels and handle make the 26.5 kg heater suitable for demanding working environments and easier to move between locations.
An important feature of the YATO YT-99739 is the provision for connection to a suitable combustion-gas exhaust system. When correctly installed, exhaust gases can be routed outside the heated area.
This is particularly useful in workshops, warehouses, construction sites and other working environments where reducing combustion gases in the heated area is important.
The exhaust/flue pipe is not included as standard.
YATO describes this product as an “Oil Fired Direct Heater”, while its product information also explicitly states that it can be connected to an exhaust system. For this reason, it is more accurate to describe the YT-99739 as a liquid-fuel air heater with provision for flue/exhaust connection, rather than categorically classifying it as an indirect-fired heater without further manufacturer confirmation.
The exhaust system must be correctly selected, installed and routed to a safe location according to the manufacturer's instructions. Adequate combustion-air supply and ventilation must still be provided.
