Product code: YT-99760
Available quantity Available
| Parameter | Specification |
|---|---|
| Brand | YATO |
| Model | YT-99760 |
| Series | GRF |
| Heating type | Infrared, liquid fuel |
| Heating output | 13 kW |
| Manufacturer-stated heating area | 70–90 m²* |
| Fuel | Diesel |
| Fuel tank capacity | 22 L |
| Fuel consumption | 1 kg/h ** |
| Operating time per full tank | approx. 18 h* |
| Pump pressure | 8 bar |
| Temperature control | Yes |
| Thermostat | Manual |
| Control panel | Digital |
| Display | LED |
| Timer | 1–24 h |
| Timer adjustment | 1-hour increments |
| Operating temperature range | 0–55°C |
| Power supply | 220–240 V AC |
| Frequency | 50 Hz |
| Motor power | 60 W |
| Electrical insulation class | I |
| Power cable length | 1.2 m |
| Dimensions | 820 × 426 × 1008 mm |
| Weight | 36.6 kg |
*Actual heating area and operating time depend on ambient temperature, room volume, insulation, ventilation and other operating conditions.
YATO YT-99760 is a professional 13 kW infrared liquid-fuel heater designed for heating workshops, warehouses, industrial facilities and other properly ventilated working areas, as well as for surface drying during construction and renovation work.
Unlike conventional forced-air heaters, the YT-99760 transfers heat by infrared radiation directly to objects, walls and other surfaces. These surfaces absorb the energy and subsequently release heat into the surrounding environment. This allows heat to be felt quickly without producing a strong stream of heated air, reducing drafts and airborne dust movement.
The manufacturer specifies a heating area of 70–90 m². The heater has a 22-litre fuel tank, with a stated operating time of approximately 18 hours per full tank, depending on operating conditions.
A manual thermostat, digital control panel and LED display provide convenient control. The integrated timer can be set between 1 and 24 hours in one-hour increments.
Instead of primarily heating the entire volume of air, an infrared heater transfers energy to objects and surfaces within its radiation zone. These surfaces absorb the infrared energy, warm up and subsequently release heat into the surrounding environment.
This provides a rapid sensation of heat and can be particularly practical when a specific working zone or surface needs to be heated or dried.
Because the heater does not rely on a strong forced stream of hot air, it also produces less air movement and lifts less dust than conventional forced-air heaters.
The YATO YT-99760 is suitable for:
The integrated manual thermostat allows temperature adjustment according to working conditions. A digital control panel with LED display provides convenient monitoring of operating parameters.
The timer can be set from 1 to 24 hours in one-hour increments, allowing the desired operating period to be selected in advance.
This is a fuel-burning infrared heater, and the manufacturer explicitly requires operation only in well-ventilated areas. Adequate fresh-air supply must be maintained, and all instructions and safety requirements must be followed.
Place the heater on a stable, level and non-flammable surface. Surfaces can become very hot during operation and may cause burns. Do not open the appliance door while the heater is operating.
