Product code: YT-99705
Available quantity Available
| Parameter | Specification |
|---|---|
| Brand | YATO |
| Model | YT-99705 |
| Series | GRF |
| Heater type | Electric PTC fan heater |
| Maximum power | 3000 W / 3 kW |
| Manufacturer-stated max. heating area | up to 30 m²* |
| Airflow | 245 m³/h |
| Operating modes | 30 / 2000 / 3000 W |
| Fan-only mode | Yes |
| Heating element | PTC |
| Thermostat | Automatic reset |
| Thermostat protection temperature | 85°C |
| Overheating protection | Yes |
| Operating indicator | Yes |
| Power supply | 220–240 V AC |
| Frequency | 50 Hz |
| Protection rating | IPX0 |
| Power cable length | 1.3 m |
| Dimensions | 247 × 168 × 265 mm |
| Weight | 2.1 kg |
| Application | Space heating |
*The stated 30 m² is the manufacturer's maximum reference value. Actual heating performance depends on room volume, ceiling height, insulation, initial temperature and heat loss.
YATO YT-99705 is a compact and portable 3000 W electric fan heater with a PTC ceramic heating element, designed for rapid heating of rooms and working areas. It is suitable for workshops, garages, technical rooms, small warehouses and supplementary heating during construction or renovation work.
The heater offers three operating modes: fan-only operation, 2000 W heating and full 3000 W heating. An airflow of up to 245 m³/h helps distribute warm air quickly throughout the room.
YATO specifies a maximum heating area of up to 30 m². Its compact construction and weight of only 2.1 kg make the unit easy to move between different working areas.
Integrated overheating protection and an automatically resetting thermostat provide additional protection during operation.
30 W – fan mode
Provides air circulation without active heating.
2000 W – partial heating power
Suitable for maintaining temperature or when full heating output is not required.
3000 W – maximum heating power
Provides maximum output for faster heating of the room or working area.
The YT-99705 uses a PTC (Positive Temperature Coefficient) ceramic heating element. As the temperature of the PTC element increases, its electrical resistance also rises, giving the technology inherent temperature-limiting characteristics.
Combined with integrated overheating protection and an automatically resetting thermostat, this helps provide stable heater operation.
The YATO YT-99705 is suitable for:
Despite its 3 kW maximum output, the YT-99705 operates from a 220–240 V AC, 50 Hz supply and does not require a 400 V three-phase connection.
Because of its relatively high 3 kW electrical load, the heater should be connected to a suitably rated electrical circuit. Inadequately rated extension leads should not be used.
The YT-99705 has an IPX0 protection rating, meaning that it provides no protection against water ingress. It should be used in dry conditions and protected from rain, water and excessive moisture.
Never cover the heater during operation. The air inlet and hot-air outlet must remain unobstructed, and all safety clearances specified in the manufacturer's instructions must be maintained.
