Product code: YLMIG200FISWFGR
Available quantity Available
| Manufacturer | YOULI |
|---|---|
| Part type | Wire-feed roller |
| Compatible machine | MIG-200FIS / YLMIG200FIS |
| Parent product code | YLMIG200FISWFGR |
| 0.6 / 0.8 mm variant | YLMIG200FIS0608 |
| 0.8 / 1.0 mm variant | YLMIG200FIS0810 |
| Supplied item | 1 roller in the selected variant |
| Select a set | Model | Barcode | Stock | Quantity | Action |
|---|---|---|---|---|---|
| 0.6/0.8mm (€6.06) | YLMIG200FIS0608 | Low stock |
|
||
| 0.8/1.0mm (€6.06) | YLMIG200FIS0810 | Available |
|
| Manufacturer: | YOULI |
YOULI wire-feed roller is a replacement part for the wire-feed mechanism of the MIG-200FIS (YLMIG200FIS) inverter welder. Select the version according to the welding-wire diameter.
Two variants are available: for 0.6/0.8 mm or 0.8/1.0 mm wire. Each order selection is for one roller; the two variants are not supplied together as a two-piece set.
The catalogue specifies compatibility with the MIG-200FIS / YLMIG200FIS welder. Matching wire diameter alone does not confirm compatibility with another machine: the roller mounting and feeder dimensions must also match.
Disconnect the welder from the power supply before changing the roller. After installation, check that the wire runs through the correct groove and adjust feed pressure according to the machine manual.
One wire-feed roller in the selected variant. The welding machine and wire are not included.
| Specification | |
|---|---|
| Manufacturer | YOULI |
There are no reviews for this product!