
Product code: PL1150
Available quantity Available
| Brand / model | PULI PL1150 |
|---|---|
| Maximum wheel weight | 65 kg |
| Rim diameter | 10–24″ |
| Rim width | 1.5–20″ |
| Power supply | 220 V, 50 Hz |
| Distance and diameter input | Manual |
| Measuring cycle | 8 s |
| Motor power | 0.2 kW |
| Balancing modes | 6 |
| Balancing speed | 200 rpm |
| Specified balancing accuracy | ±1 g |
| Self-calibration and diagnostics | Yes |
The PULI PL1150 is a wheel balancer for automotive wheels, used to identify imbalance and determine the balancing weights required for correction. It accommodates wheels weighing up to 65 kg and rims with a diameter of 10–24″.
The distance to the rim and the rim diameter are entered manually. Self-calibration and diagnostic functions support machine preparation and condition checks.
There are 6 balancing modes to select from. The specified measuring cycle is 8 seconds. Select a mode suited to the rim and to the way the balancing weights are attached.
Check the complete wheel weight as well as the rim diameter and width. The rim width range is 1.5–20″. Correct centring requires mounting components matched to the wheel centre bore; diameter alone does not establish compatibility.
Remove old balancing weights, clean the mounting surfaces and centre the wheel accurately before measurement. Perform self-calibration as directed in the machine instructions. Run a further measurement after applying the correction weights.
The version offered here is specified for 220 V, 50 Hz power. Check the actual machine rating plate and connection requirements before preparing the work area. Confirm the supplied centring cones, adapters and other accessories against the wheels to be serviced.
| Specification | |
|---|---|
| Manufacturer | PULI |
There are no reviews for this product!