Plasma torch CB-50

Plasma torch CB-50

CB-50 plasma torch equipment and consumables are used with compatible air plasma cutting systems. This Irankistai.lt category includes CB-50 torches, cutting nozzles, electrodes, gas diffusers, protective caps and consumable kits. When choosing replacement parts, verify their design, dimensions and compatibility with the specific plasma cutting machine.

CB-50 plasma torch parts and accessories

  • Cutting nozzles. The catalogue includes cylindrical non-contact cutting nozzles with 1.0 mm, 1.1 mm and 1.2 mm orifices, plus a 1.0 mm conical contact-cutting nozzle.
  • Electrodes. CB50-E10 electrodes marked Zr are listed in packs of 10. Their catalogue dimensions include 18 mm height and an 8 mm outer base diameter.
  • Gas diffusers. The PE0007 diffuser is listed for the CB-50 torch airflow system.
  • Protective caps. The PC0003 protective head is listed for a compatible CB-50 torch design, with a catalogue height of 33.5 mm.
  • Consumable kits. CB-50KIT is listed as an eight-piece replacement parts kit. Check the individual product listing for its exact contents.
  • Complete torch assembly. The CB-50-5E torch is listed with a 5 m hose package.

CB-50 plasma torch technical specifications

According to the catalogue specifications for CB-50-5E, the torch has a 5 m hose package, a listed cutting current of 50 A, a duty cycle of 50 A / 60%, operating air pressure of 4.5–5.0 bar and an airflow requirement of 120 l/min. These figures apply to this specific catalogue product and should not be assumed to apply to every CB-50-type torch.

Contact and non-contact CB-50 cutting nozzles

The CB-50 category contains nozzles with different designs. CB-50-B1, CB-50-B11 and CB-50-B12 are listed as cylindrical non-contact nozzles with 1.0 mm, 1.1 mm and 1.2 mm orifices respectively. CB-50-AK1 is a conical contact-cutting nozzle with a 1.0 mm orifice. These nozzle types have different operating arrangements, so check the torch construction and manufacturer instructions before replacement.

How to choose the correct CB-50 cutting nozzle

  • Orifice diameter. Confirm whether the manufacturer recommends a 1.0 mm, 1.1 mm or 1.2 mm nozzle for the intended cutting parameters.
  • Nozzle design. Distinguish between cylindrical non-contact nozzles and conical contact-cutting nozzles.
  • Dimensions. The listed cylindrical nozzles are 11 mm high, with a 12.5 mm outer base diameter and a 10.5 mm outer diameter near the outlet.
  • Compatibility. Compare the exact part number, fitting and manufacturer recommendations.

Orifice diameter alone is not sufficient to determine the correct cutting current or maximum material thickness. Refer to the torch and plasma cutter documentation.

CB-50 electrodes, diffusers and protective caps

The electrode is a wear component of the plasma torch, while the diffuser helps distribute airflow inside the torch. The protective cap supports and protects components of the corresponding torch design. The catalogue lists CB50-E10 electrodes, the PE0007 diffuser and the PC0003 protective head. Check their part numbers and dimensions against the original components before ordering.

When should CB-50 plasma torch consumables be replaced?

Worn electrodes and cutting nozzles can cause unstable arcs, uneven cuts, increased dross and reduced cutting quality. Inspect components according to the manufacturer's wear criteria. Clean, dry compressed air, correct operating pressure and suitable cutting parameters help reduce premature wear.

Plasma cutting safety and maintenance

Before replacing torch components, switch off the equipment, disconnect power and follow the manufacturer's safety procedures. During cutting, use suitable eye and face protection, gloves, protective clothing and effective fume extraction. Regularly inspect the hose assembly, cables, connections and compressed-air system.

Frequently asked questions

What is the cutting current of the CB-50-5E torch?

The catalogue lists a cutting current of 50 A and a duty cycle of 50 A / 60% for the CB-50-5E model.

How long is the CB-50 torch hose package?

The listed CB-50-5E model has a 5 m hose package.

What air pressure does the CB-50-5E require?

The catalogue specifies operating air pressure of 4.5–5.0 bar and airflow of 120 l/min.

What is the difference between contact and non-contact CB-50 nozzles?

The catalogue identifies cylindrical CB-50-B-series nozzles as non-contact types and the conical CB-50-AK1 as a contact-cutting nozzle. Check the torch instructions for the correct operating arrangement.

Which CB-50 cutting nozzle sizes are listed?

The catalogue includes cylindrical 1.0 mm, 1.1 mm and 1.2 mm nozzles, as well as a 1.0 mm conical contact-cutting nozzle.

Are all CB-50 nozzles interchangeable?

No. They may differ in design and intended cutting method. Check exact part numbers, dimensions and manufacturer compatibility information before replacement.

Technical specificationsProduct codePC0003Listed torch / equipmentCB-50Part typeretaining capHeight3..
€1000
Technical specificationsProduct codePE0007Listed torch / equipmentCB-50Part typediffuser..
€1000
Technical specificationsProduct codeCB-50KITListed torch / equipmentCB-50Part typeconsumable kitNumb..
€1900
Technical specificationsProduct codeCB-50-AK1Listed torch / equipmentCB-50Part typecutting nozzleTyp..
€1999
Technical specificationsProduct codeCB50-E10Listed torch / equipmentCB-50Part typeelectrodesQuantity..
€1999
Technical specificationsProduct codeCB-50-B1Listed torch / equipmentCB-50Part typecutting nozzleQuan..
€1999
Technical specificationsProduct codeCB-50-B11Listed torch / equipmentCB-50Part typecutting nozzleQua..
€1999
Technical specificationsProduct codeCB-50-B12Listed torch / equipmentCB-50Part typecutting nozzleQua..
€1999
Technical specificationsProduct codeCB-50-5ETorch typeCB-50Hose assembly length5 mCutting current li..
€14900
Write
Call us