SPARTUS EasyMIG 210LED synergic MIG/MAG welder, 200 A, 230 V

SPARTUS EasyMIG 210LED is a compact inverter welder for workshop repairs, assembly and fabrication tasks. Powered by a single-phase 230 V supply, it combines MIG/MAG, MMA and TIG Lift processes in one machine.

Synergic MIG/MAG control simplifies setup with 0.6, 0.8 and 1.0 mm steel wire. Manual adjustment, inductance control and an LED display let the operator adapt the settings to the wire, joint and preferred working technique.

MIG/MAG control and wire feeding

• Synergic and manual parameter selection.
• 2T and 4T torch operation for shorter and longer welds.
• Adjustable inductance for tuning arc characteristics.
• Built-in two-roll wire feeder accommodating spools up to 5 kg and Ø200 mm.
• Polarity reversal supports suitable self-shielded flux-cored wire without an external shielding-gas supply.

MMA and TIG Lift capability

Current ranges are 50–200 A for MIG/MAG, 10–200 A for TIG and 10–160 A for MMA. TIG Lift uses contact arc ignition rather than high-frequency HF starting.

• Hot Start assists arc ignition with coated electrodes.
• Arc Force supports control of MMA arc dynamics.
• VRD reduces open-circuit voltage.

Applications and selection

Suitable for steel-part repairs, small structures and general workshop work. Its 10 kg weight and 470 × 190 × 330 mm housing make it easier to move between work areas. This model does not offer pulsed MIG. TIG welding requires a suitable TIG torch and shielding gas; a TIG torch is not included in this package.

Supplied equipment

• SPARTUS EasyMIG 210LED welder.
• SPARTUS MIG SPE 150 torch, 3 m.
• Electrode holder with 2 m cable.
• Work return cable with clamp, 1.5 m.
• Gas hose.