Sherman MIG 351M/4R MIG/MAG and MMA welder, 350 A, 400 V

Delivery in 3-10 w.d.

Product code: SINW-MIG351M

Available quantity Delivery time 3-10 working days

Delivery by order in 3-10 working days!

Technical specifications

Product code SINW-MIG351M
Technology IGBT
Welding processes MIG/MAG, MMA DC
Power supply 3 × 400 V AC / 50 Hz
MIG/MAG current range 50–350 A
Maximum MMA current 350 A
Rated duty cycle 350 A / 60 %
Maximum apparent input power 14.7 kVA
Wire spools D200 / 5 kg; D300 / 15 kg
Feeder roll count 4
Torch control 2T / 4T
Adjustable inductance Yes
Maximum Spool Gun current 150 A
Fan control Fan Stop
€88000 inc VAT
Have any questions about this item? Ask
Manufacturer: Sherman

Sherman MIG 351M/4R is a three-phase IGBT inverter welder for MIG/MAG and MMA work in workshops and metal fabrication. It features a four-roll wire feeder and manual parameter control.

MIG/MAG current adjusts from 50 to 350 A, while maximum MMA output is 350 A. The supply is 3 × 400 V / 50 Hz and the rated duty cycle is 350 A / 60%.

MIG/MAG and self-shielded wire

MIG/MAG voltage and wire feed are set separately. Adjustable inductance helps match arc characteristics to the workpiece. Polarity reversal supports suitable self-shielded flux-cored wire without external shielding gas.

Wire feeder and torch control

The four-roll mechanism accepts D200 (5 kg) and D300 (15 kg) wire spools. In 2T mode the torch trigger is held during welding; 4T allows welding without holding it continuously. Post-weld gas-flow timing is adjustable.

MMA and optional Spool Gun

MMA uses coated electrodes. An optional compatible Spool Gun with a D100 spool provides wire feeding at the torch; the manual specifies a 150 A limit for this mode. The Spool Gun is not included.

Duty cycle and cooling

A 60% duty cycle means 6 minutes of welding followed by 4 minutes of cooling in a 10-minute period, under the manufacturer's specified conditions. Fan Stop switches off the fan at low load. Overheating protection is provided.

Supplied equipment

  • Welding machine
  • TW36 torch – 3 m
  • MMA electrode holder with cable
  • Return cable with clamp
  • Welding hand shield
  • Chipping hammer with brush

There are no reviews for this product!

Write
Call us