Sherman MIG 320Y/4R MIG/MAG welder, 320 A, 400 V

Delivery in 3-10 w.d.

Product code: SINW-MIG320Y

Available quantity Delivery time 3-10 working days

Delivery by order in 3-10 working days!

Technical specifications

Parameter Value
Brand Sherman
Model MIG 320Y/4R
Item code SINW-MIG320Y
Technology IGBT
Welding processes MIG/MAG; self-shielded flux-cored wire
Power supply 3 × 400 V AC, 50 Hz
Welding current 50–320 A
Rated duty cycle 320 A / 60%
Maximum input current 17.5 A
Maximum apparent input power 10.2 kVA
Wire feeder 4-roll
Wire diameter 0.8–1.6 mm
Wire feed speed 1.5–19 m/min
Wire spool diameter D200 / D300
Wire spool capacity listed by the store 5 / 15 kg
Trigger control 2T / 4T
Inductance adjustment Yes
Polarity reversal Yes
Post-flow Adjustable
Fan control Fan Stop
Protection rating IP21
Dimensions 760 × 375 × 730 mm
Machine weight 50 kg
€80000 inc VAT
Have any questions about this item? Ask
Manufacturer: Sherman

Sherman MIG 320Y/4R is a three-phase inverter MIG/MAG welder with a 50–320 A current range. It is intended for workshop fabrication and repair tasks with a suitable 400 V power supply.

A four-roll wire feeder, adjustable inductance and 2T/4T trigger control help configure the machine for the chosen wire and joint. Polarity reversal also allows the use of compatible self-shielded flux-cored wire.

Four-roll wire feeding

The 4R feeder delivers wire to the torch through a four-roll mechanism. The machine accepts D200 and D300 spools and provides a 1.5–19 m/min wire-feed range. Match the rolls, liner and contact tip to the wire type and diameter.

Inductance and 2T/4T control

Inductance adjustment changes MIG/MAG arc behaviour to suit the material and joint. In 2T mode, welding continues while the torch trigger is held; 4T allows welding without holding it continuously. Post-flow timing is also adjustable.

MIG/MAG and self-shielded wire

Select shielding gas appropriate for the material and wire when using MIG/MAG. Compatible self-shielded flux-cored wire can be used without external shielding gas, with the polarity and settings required by the wire manufacturer. Aluminium wire requires suitable feeder and torch consumables.

320 A output and duty cycle

The manufacturer rates the machine at 320 A with a 60% duty cycle. This load requires the cooling intervals and operating conditions specified in the instructions. Fan Stop controls the fan at low load, while thermal protection responds to overheating.

Power supply and setup

The machine requires a three-phase 3 × 400 V, 50 Hz supply. Before use, check the installation against the rating plate and instructions, the work return connection and the compatibility of wire-feed components.

Package contents

  • Sherman MIG 320Y/4R welding machine.
  • TW-36 MIG torch, 3 m.
  • Work return cable with clamp.

This product listing specifies a 3 m torch. Select welding wire, shielding gas and other components required for the application separately.

There are no reviews for this product!

Write
Call us