Product code: SINW-MIG300M
Available quantity Delivery time 3-10 working days
| Parameter | Value |
|---|---|
| Brand | Sherman |
| Model | MIG 300M/4R |
| Item code | SINW-MIG300M |
| Technology | IGBT |
| Welding processes | MIG/MAG, MMA DC; self-shielded flux-cored wire |
| Power supply | 3 × 400 V AC, 50 Hz |
| MIG/MAG current | 50–300 A |
| MMA current | 60–300 A |
| Rated duty cycle | 300 A / 60% |
| Maximum input current | MIG: 15.4 A; MMA: 16.5 A |
| Maximum apparent input power | 10 kVA |
| MMA open-circuit voltage | 59 V |
| Wire feeder | 4-roll |
| Wire spools | D200 / 5 kg; D300 / 15 kg |
| Wire feeding | Continuously adjustable |
| Trigger control | 2T / 4T |
| Inductance adjustment | Yes |
| Post-flow | Adjustable |
| Optional torch support | Compatible Spool Gun |
| Spool Gun mode current limit in the manual | 150 A |
| Fan control | Fan Stop |
| Protection rating | IP21S |
| Dimensions | 930 × 435 × 695 mm |
| Manufacturer: | Sherman |
Sherman MIG 300M/4R is a three-phase inverter welder for MIG/MAG and MMA work. MIG/MAG current is adjustable from 50 to 300 A and MMA from 60 to 300 A, allowing use for wire-fed and coated-electrode welding tasks.
The machine uses a 3 × 400 V supply and includes a four-roll wire feeder, 2T/4T control and adjustable inductance. It also supports an optional compatible Spool Gun torch carrying its own wire spool.
MIG/MAG feeds wire to the torch with shielding gas selected for the workpiece and filler material. MMA uses coated electrodes. Compatible self-shielded flux-cored wire allows operation without external shielding gas, using the polarity and settings required by the wire.
The 4R mechanism feeds wire from the machine-mounted spool to the MIG torch. D200 5 kg and D300 15 kg spools are supported. Match the rolls, contact tip and torch liner to the material and diameter when changing wire.
Inductance adjustment changes MIG/MAG arc behaviour. In 2T mode, welding continues while the trigger is held; 4T allows welding without holding it continuously. Post-flow timing is adjustable, and Fan Stop controls the fan at low load.
A compatible Spool Gun has its own wire feed and a D100 spool at the torch, useful when another wire is required periodically. The manual specifies a 150 A current limit for Spool Gun mode. This optional torch is not included in the listed package.
The manufacturer rates the welder at 300 A with a 60% duty cycle. Maximum output requires the operating and cooling conditions specified in the instructions. A suitable three-phase 400 V supply is required; check the installation against the rating plate and manual before connection.
Accessories follow this store’s listing with a 3 m torch. Select wire, gas and other application-specific components according to the welding process.
There are no reviews for this product!