Sherman MIG 261M/4R MIG/MAG and MMA welder, 250 A, 230/400 V

Delivery in 3-10 w.d.

Product code: SINW-MIG261M

Available quantity Delivery time 3-10 working days

Delivery by order in 3-10 working days!

Technical specifications

Parameter Value
Brand Sherman
Model MIG 261M/4R
Item code SINW-MIG261M
Technology IGBT
Welding processes MIG/MAG, MMA DC; self-shielded flux-cored wire
Power supply 1 × 230 V or 3 × 400 V AC, 50 Hz
MIG/MAG current, 400 V 50–250 A
MMA current, 400 V 50–250 A
Maximum current at 230 V on the manufacturer’s page 180 A
Maximum current at 400 V 250 A
Rated duty cycle 250 A / 60%
Maximum input current, 230 V MIG: 30.8 A; MMA: 36.5 A
Maximum input current, 400 V MIG: 12.1 A; MMA: 12.8 A
Maximum apparent input power, 400 V 9.4 kVA
MMA open-circuit voltage 59 V
Wire feeder 4-roll
Wire spools D200 / 5 kg; D300 / 15 kg
Wire feeding Continuously adjustable
Trigger control 2T / 4T
Inductance adjustment Yes
Post-flow Adjustable
Optional torch support Compatible Spool Gun
Spool Gun mode current limit in the manual 150 A
Fan control Fan Stop
Protection rating IP21S
Dimensions 930 × 435 × 695 mm
€76000 inc VAT
Have any questions about this item? Ask
Manufacturer: Sherman

Sherman MIG 261M/4R is an inverter MIG/MAG and MMA welder with a 230 V single-phase or 400 V three-phase supply. It is intended for workshop fabrication and repair tasks.

The manufacturer’s current product page specifies a maximum MIG/MAG and MMA output of 180 A at 230 V and 250 A at 3 × 400 V. A four-roll feeder, adjustable inductance and 2T/4T control help configure the machine for the chosen wire and joint.

MIG/MAG, MMA and self-shielded wire

MIG/MAG feeds wire to the torch with shielding gas selected for the workpiece and filler material. MMA uses coated electrodes. Compatible self-shielded flux-cored wire allows operation without external shielding gas, using the polarity and settings required by the wire.

Four-roll wire feeder

The 4R mechanism feeds wire from the machine-mounted spool to the MIG torch. D200 5 kg and D300 15 kg spools are supported. Match the rolls, contact tip and torch liner to the material and diameter when changing wire.

Inductance and trigger control

Inductance adjustment changes MIG/MAG arc behaviour. In 2T mode, welding continues while the trigger is held; 4T allows welding without holding it continuously. Post-flow timing is adjustable, and Fan Stop controls the fan at low load.

Optional Spool Gun

A compatible Spool Gun has its own wire feed and a D100 spool at the torch, useful when another wire is required periodically. The manual specifies a 150 A current limit for Spool Gun mode. This optional torch is not included in the listed package.

Power supply and duty cycle

Support for 230 V or 3 × 400 V power allows use at different workplaces. Input currents differ: at 230 V, up to 30.8 A for MIG and 36.5 A for MMA; at 400 V, 12.1 and 12.8 A respectively. The rated 250 A / 60% duty cycle must be interpreted under the instructions and the conditions applicable to the actual machine. Match the installation to the rating plate.

Package contents

  • Sherman MIG 261M/4R welding machine.
  • TW-25 MIG torch, 3 m.
  • MMA electrode holder with cable.
  • Work return cable with clamp.
  • Welding hand shield.
  • Chipping hammer with brush.

Accessories follow this store’s listing with a 3 m torch. Select wire, gas and other application-specific components according to the welding process.

There are no reviews for this product!

Write
Call us