Product code: TRA402
Available quantity Available
| Model | TRA402 |
|---|---|
| Manufacturer | TONGRUN |
| Type | Air hydraulic jack |
| Catalogue-listed lifting capacity | 40 / 20 t |
| Minimum height | 190 mm |
| Catalogue-listed air supply pressure | 6–8 bar (0.6–0.8 MPa) |
| Lift at 40 t load | 106 mm |
| Lift at 20 t load | 88 mm |
| Height extensions | 75 + 45 mm |
| Net weight | 62 kg |
| First package dimensions | 840 × 300 × 270 mm |
| Second package dimensions | 1390 × 280 × 110 mm |
| Manufacturer: | TONGRUN |
The TONGRUN TRA402 air hydraulic jack has lifting strokes specified for two different load ratings. The catalogue lists a 40 / 20 t capacity, with a 106 mm lift at 40 t and an 88 mm lift at 20 t.
The listed minimum height is 190 mm, with height extensions stated separately as 75 + 45 mm. The specified air supply pressure is 6–8 bar.
Compressed air operates the hydraulic mechanism. The catalogue-listed air supply pressure is shown in the specification table. Match the air connector and required compressor output to the actual unit.
The two capacity figures do not mean that the higher load is permitted throughout the full lift. Check the load allowed at each stage and the final height with extensions in the instructions for the actual unit.
Position the jack on a firm, level surface and use only the lifting points specified by the vehicle manufacturer. Before working beneath a raised load, support it with stands of sufficient capacity. The jack is for lifting; separate supports are required for sustained load support.
| Specification | |
|---|---|
| Manufacturer | TONGRUN |
There are no reviews for this product!