Product code: GL036DV
Available quantity Available
| Product code | GL036DV |
|---|---|
| Vehicle starting voltage | 12 / 24 V |
| 12 V starting current as specified | 1000 A |
| 24 V starting current as specified | 600 A |
| 12 V peak current | 2400 A |
| 24 V peak current | 1200 A |
| Internal energy source / capacity | Li-ion; 36,000 mAh; 133.2 Wh |
| DC output | 12 V / 8 A |
| USB output | 5 V / 2.1 A |
| Features and construction | LED charge indicator; ON / OFF switch; audible and visual polarity warning |
| Protections | Reverse polarity, short circuit, over-discharge and overheat |
| Supplied items | Starter; 12 / 24 V clamps; vehicle DC charging cable; instructions |
GL036DV is intended for emergency starting of compatible vehicles with a 12 / 24 V electrical system. Select the required starting mode under the instructions.
Energy source: Li-ion; 36,000 mAh; 133.2 Wh. The portable design provides starting support away from a mains outlet.
Check vehicle voltage and starting demand. Maximum or peak current is not continuous current, and CA should not be treated as CCA without a stated test standard. Actual performance depends on temperature, engine and battery condition.
Capacity must be read with its reference voltage. A value in mAh is not the available Ah at the vehicle's 12 V or 24 V supply. Keep the energy source prepared under the unit's charging and storage instructions.
Use USB and DC outputs only with devices matching the stated voltage, current and connector. A laptop or other high-power device requires a specifically compatible output.
Follow the vehicle and starter connection sequence, polarity, maximum cranking duration and waiting intervals. Remove the equipment after use as instructed.
Starter; 12 / 24 V clamps; vehicle DC charging cable; instructions.
There are no reviews for this product!