KRAFT&DELE KD5962 Indirect-Fired Oil Heater, 40 kW, 38 L Tank

The KRAFT&DELE KD5962 is a powerful 40 kW liquid-fuel forced-air heater with a flue gas exhaust system, designed for heating large working areas and industrial spaces.

It is suitable for warehouses, production facilities, workshops, construction sites and other environments requiring a substantial supply of warm air.

The heater uses an indirect heating system. Combustion gases are directed through a separate exhaust outlet, while a fan moves the air being heated across a heat exchanger. When the flue system is correctly installed, combustion products are not discharged directly into the heated air stream.

Its 40 kW heating output and 780 m³/h airflow support efficient heat distribution in larger spaces.

An integrated thermostat allows the desired temperature to be set and helps regulate heater operation automatically.

The heater features a 38-litre fuel tank, with a supplier-listed maximum fuel consumption of 2.4 kg/h.

The manufacturer also specifies safety systems responding to flame failure, overheating and electrical supply problems.

A robust construction, two large transport wheels and a convenient handle make the heater easier to move between work locations.

Powerful 40 kW Heating Output

The 40 kW heating output makes this heater suitable for larger industrial and working environments.

It can be used to raise room temperature or provide supplementary heating during colder periods.

Actual heating performance depends on room volume, insulation, outdoor temperature and ventilation.

Indirect Heating with Flue Gas Exhaust

One of the key features of the KRAFT&DELE KD5962 is its separate combustion gas exhaust system.

Unlike direct-fired heaters, which release combustion products into the heated air stream, indirect-fired heaters transfer heat through a heat exchanger.

When the flue system is correctly connected, combustion gases are discharged outdoors.

Important: An indirect heating system does not automatically make the heater suitable for every enclosed space. Correct flue installation, combustion air supply and adequate ventilation are essential.

780 m³/h Airflow

The integrated electric fan provides an airflow of 780 m³/h.

It moves air through the heating system and distributes warm air throughout the working area, helping heat reach different parts of the space.

Integrated Thermostat

The heater features a thermostat for setting the desired temperature.

Thermostatic control helps regulate operation according to heating demand and avoid unnecessary heating once the selected temperature is reached.

38-Litre Fuel Tank

The 38 L fuel tank supports extended operation without frequent refuelling.

The manufacturer specifies maximum fuel consumption of 2.4 kg/h.

Actual runtime depends on fuel density, operating mode and consumption. Since fuel consumption is expressed in kilograms per hour and tank capacity in litres, precise runtime cannot be calculated without confirming the fuel type.

Safety Systems

The supplier specifies the following protective functions:

• overheating protection;

• flame failure monitoring;

• protection associated with electrical supply problems.

These systems help reduce the risk of abnormal operation but do not replace proper installation and safe operating procedures.

Convenient Transport

The heater is equipped with two large wheels and a transport handle.

This makes it easier to move around warehouses, workshops and construction sites.

The supplier-listed weight is 31.71 kg.

Applications

The KRAFT&DELE KD5962 liquid-fuel heater is suitable for:

• warehouse heating;

• industrial and production facilities;

• repair workshops;

• construction sites;

• larger garages;

• agricultural buildings;

• temporary or supplementary workplace heating;

• other suitably ventilated areas where combustion gases can be safely discharged outdoors.

Package Contents

According to the supplier:

• 1 × KRAFT&DELE KD5962 liquid-fuel air heater, 40 kW;