Product code: KD5960
Available quantity Available
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
KRAFT&DELE |
|
Model |
KD5960 |
|
SKU |
KD5960 |
|
EAN |
5903957019130 |
|
Equipment type |
Liquid-fuel forced-air heater |
|
Heating system |
Direct-fired |
|
Heating output |
60 kW |
|
Electrical supply |
220 V / 50 Hz |
|
Maximum fuel consumption |
4.0 kg/h |
|
Warm air flow |
1100 m³/h |
|
Fuel tank capacity |
38 L |
|
Thermostat |
Integrated |
|
Air circulation |
Electric fan |
|
Flame failure protection |
Yes |
|
Overheating protection |
Yes |
|
Electrical supply fault protection |
Stated by supplier |
|
Construction |
Steel |
|
Transport wheels |
Included |
|
Transport handle |
Included |
|
Dimensions |
990 × 395 × 545 mm |
|
Supplier-listed weight |
27.64 kg |
| Manufacturer: | Kraftdele |
The KRAFT&DELE KD5960 is a powerful 60 kW liquid-fuel forced-air heater, designed for rapid heating of large, well-ventilated working areas and industrial spaces.
It is suitable for warehouses, production facilities, workshops, construction sites and other environments requiring intensive warm air delivery.
The heater uses a direct-fired heating system. Heat generated during combustion is transferred directly to the airflow produced by the integrated fan, allowing warm air to be distributed quickly throughout the working area.
Important: In a direct-fired heater, combustion products enter the heated environment. The KD5960 must therefore only be used where sufficient fresh air and ventilation are provided in accordance with the manufacturer's instructions.
With a 60 kW heating output and 1100 m³/h airflow, the heater can deliver a substantial volume of warm air.
An integrated thermostat allows the desired temperature to be selected and automatically regulates heater operation.
The unit features a 38-litre fuel tank, with a supplier-listed maximum fuel consumption of 4.0 kg/h.
The KD5960 also includes safety systems responding to flame failure, overheating and electrical supply problems.
Its steel construction, large transport wheels and ergonomic handle make it easier to move around the workplace.
The 60 kW heating output makes the heater suitable for large working areas where substantial heat delivery is required.
It can be used to warm working spaces before operations begin or provide supplementary heating during colder periods.
Actual heating performance depends on room volume, insulation, outdoor temperature and ventilation.
The KRAFT&DELE KD5960 operates using a direct combustion heating system.
Heat produced by the burner is transferred directly to the airflow generated by an electric fan.
This enables rapid warm air delivery.
Direct-fired heaters must not be used in unventilated or residential spaces. Combustion requires oxygen, and the resulting combustion products must be managed through adequate air exchange.
The integrated electric fan provides 1100 m³/h airflow.
This intensive air circulation helps distribute heat throughout larger areas and raise temperatures in the working zone.
The thermostat allows the desired temperature to be selected and automatically regulates heater operation.
This helps maintain more consistent heating conditions and reduce unnecessary fuel use when the selected temperature is reached.
The heater is equipped with a 38 L fuel tank.
The supplier specifies maximum fuel consumption of 4.0 kg/h.
The large fuel tank allows longer operating periods without frequent refuelling.
Exact operating time depends on the fuel type, density, thermostat settings and actual working conditions.
The manufacturer specifies the following protective functions:
overheating protection;
flame failure monitoring;
protection associated with electrical supply problems.
These features help reduce the risk of abnormal operation but do not replace adequate ventilation or safe operating procedures.
The heater features large transport wheels and an ergonomic handle.
These make it easier to reposition the unit between working areas.
The supplier-listed weight is 27.64 kg, with dimensions of 990 × 395 × 545 mm.
The KRAFT&DELE KD5960 liquid-fuel heater is suitable for:
construction site heating;
large, well-ventilated warehouses;
industrial and production areas;
repair workshops;
agricultural buildings;
temporary workplace heating;
construction and renovation work in cold weather;
other large areas with sufficient fresh air supply and ventilation.
Not recommended for residential rooms, bedrooms, small enclosed spaces or locations where safe ventilation cannot be ensured.
According to the supplier:
1 × KRAFT&DELE KD5960 liquid-fuel forced-air heater, 60 kW;
There are no reviews for this product!