Product code: YLMMA250
Available quantity Available
| Product code | YLMMA250 |
|---|---|
| Welding processes | MMA, TIG DC |
| Power supply | 230 V, 50 Hz |
| MMA current | 20–250 A |
| TIG current | 10–250 A |
| Input current listed in catalogue | MMA 40 A; TIG 27 A |
| Open-circuit voltage | 65 V |
| Duty cycle listed in catalogue | 60 % |
| Output voltage listed in catalogue | MMA 30 V; TIG 20 V |
| Power factor | 0.73 |
| Efficiency | 85 % |
| Ingress protection | IP21 |
| Insulation class | F |
| Dimensions | 400 × 160 × 310 mm |
| Package dimensions | 480 × 235 × 340 mm |
| Machine weight listed in catalogue | 7 kg |
| Manufacturer: | YOULI |
YOULI YLMMA250 is an MMA welder for coated electrodes, used for joining metal components, repair and maintenance. The listed MMA welding current is 20–250 A. Select the electrode and settings according to the individual machine’s instructions.
The power supply is 230 V, 50 Hz. The additional TIG mode and its equipment requirements are described separately. Plan the job around the selected current, its duty cycle and a properly prepared joint.
Check the individual version’s instructions for permitted electrode sizes before selecting consumables. Remove rust, paint and other contamination from the joint area and attach the return clamp to clean metal. Set polarity according to the electrode marking.
The machine supports TIG welding; check the starting method specified for the actual version. A compatible TIG torch, shielding gas and gas supply equipment are required separately unless listed in the supplied equipment.
The catalogue duty-cycle data for this model are: 60 %. The percentage is not tied to a stated current, so it does not establish operating time at maximum output. Choose the working load according to the machine’s rating plate and instructions. Allow the required cooling periods and check the power supply, cable connections and cable condition.
| Specification | |
|---|---|
| Manufacturer | YOULI |
There are no reviews for this product!