Product code: ARC200
Available quantity Available
| Product code | ARC200 |
|---|---|
| Welding processes | MMA, TIG DC |
| Power supply | 230 V, 50 Hz |
| MMA current | 20–180 A |
| Open-circuit voltage | 65 V |
| Output voltage listed in catalogue | 28.8 V |
| Electrode diameter | 1.6–5.0 mm |
| Ingress protection | IP21S |
| Insulation class | F |
| Dimensions | 465 × 270 × 330 mm |
| Machine weight listed in catalogue | 5.2 kg |
PULI ARC200 is an MMA welder for coated electrodes, used for joining metal components, repair and maintenance. The listed MMA welding current is 20–180 A. The listed electrode diameter is 1.6–5.0 mm.
The power supply is 230 V, 50 Hz. The additional TIG mode and its equipment requirements are described separately. Plan the job around the selected current, its duty cycle and a properly prepared joint.
Match the 1.6–5.0 mm electrode range to the current and welding position recommended for the selected electrode. Remove rust, paint and other contamination from the joint area and attach the return clamp to clean metal. Set polarity according to the electrode marking.
The machine supports TIG welding; check the starting method specified for the actual version. A compatible TIG torch, shielding gas and gas supply equipment are required separately unless listed in the supplied equipment.
The product record does not provide a confirmed duty-cycle rating. Choose the working load according to the machine’s rating plate and instructions. Allow the required cooling periods and check the power supply, cable connections and cable condition.
| Specification | |
|---|---|
| Manufacturer | PULI |
There are no reviews for this product!