Carburettor synchronisation kit, 4 gauges, 3½″ (WT04A3018)

In Warehouse

Product code: WT04A3018

Available quantity Available

Fast Delivery

Technical Specifications

Product codeWT04A3018
Carburettors synchronised2–4
Gauges4 × 3½″, with mounting plate
Rubber hoses4 × 8 × 5 × 750 mm
Short extension tubes4 × 3.9 × 52 mm
Long extension tubes4 × 3.9 × 122 mm
M6 × 0.75 tubes4 × 10 × 53 mm
M6 × 1 tubes4 × 10 × 60 mm
€8652 inc VAT
Have any questions about this item? Ask

WT04A3018 is a four-gauge kit for synchronising 2–4 carburettors on cars and motorcycles. It compares vacuum across several channels with the engine prepared under the service procedure.

Four 3½″ gauges are mounted on a plate, while 750 mm hoses and a tube selection provide connections to suitable vacuum points. Compatibility depends on fitting threads, access and the engine design.

Engine preparation

Check the manufacturer's prerequisites, including valve clearances where required by the procedure. Synchronisation does not replace mechanical engine repair.

Consistent measuring conditions

Connect all channels securely and check hose condition. Compare readings in the same operating state; leaks at connections can distort the result.

Adjustment and completion

Follow the engine-specific sequence and target relationship between readings. Keep hoses away from hot and moving parts and restore vacuum port sealing afterwards.

There are no reviews for this product!

Write
Call us