Product code: AT4151
Available quantity Available
| Model | AT4151 |
|---|---|
| CV joint diameter range | 20–110 mm |
| Working pressure | 5–8 bar |
| Maximum air pressure | 9 bar |
| Air inlet | 1/4 in BSP |
| Weight | 3.5 kg |
| Boot type | Flexible, designed for stretching |
| Manufacturer: | ELLIENT TOOLS |
The pneumatic ELLIENT TOOLS AT4151 expands a flexible CV joint boot so it can be fitted over the joint.
Compressed air expansion permits a suitable boot to be installed without separating the joint from the driveshaft where the vehicle layout provides the necessary access.
The tool is intended for 20–110 mm joints with boots designed to stretch. This range describes the joint diameter over which the boot is expanded.
Check the boot manufacturer's permitted stretch and the actual joint diameter before installation. Rigid boots and boots not designed for stretching are unsuitable for this method.
Regulate the working pressure to 5–8 bar and do not exceed 9 bar. Disconnect the air supply before checking boot position, then tighten the clamps according to the repair instructions.
| Specification | |
|---|---|
| Manufacturer | ELLIENT TOOLS |
There are no reviews for this product!